The angry thread!

[Cam-the-airsoft-sniper]

I am angry at the freaking exam I just did.

Damn you exam! Damn you to hell!

 

[Airsoft-Ed]

F*cking pissed off.

Just spent about 45 minutes to an hour fitting the Version 1 ASCU into my M16, only to find that the c*nting selector plate I have is entirely plastic, when the one I NEED for it to work has to have a brass section on it. Meaning I won't have a working M16 for when I go skirmishing tomorrow... :angry:

 

[Airsoft-Ed]

Just got my M16 working, I tested the circuit and everything by installing the motor etc etc.

Obviously to fasten the gun back together I had to take down the motor and grip etc to get the gearbox back in the lower receiver.

Only problem is, one of the bastarding motor connection leads decided it was going to rape the motor shaft like a retard, jamming the motor in the grip, meaning I couldn't get the motor out of the grip, meaning I couldn't get the gearbox in the gun.

So I had to muscle the motor out of the grip, tearing the wire asunder in the process and now I have to do all the f*cking wiring all over again!

So in short - The appauling design of Version 2 gearboxes.

 

[Finius]

This is EVERYTHING that I am constantly saying is wrong with V2. It's about time everyone bows down to the superiority of V3.

 

[Airsoft-Ed]

Y'know, I thought that the ASCU's were meant to be high end quality upgrade parts? But the wiring they come with is SH*T! Monumentally sh*t! It's made out of some sort of >sh*t< multi-strand tin wire that snaps if you so much as touch it, so I've now had to re-wire and re-solder the motor connectors 5 f*cking times and they STILL keep F*CKING snapping!

I feel more like throwing my M16 against a tree than bothering to do anything with it anymore. I'm going to send it to Patrol Base to get it serviced, shimmed, rewired and everything basically - if I do it myself I WILL smash it against a tree.

 

[Tariq]

Idiot woman BMW driver just side swiped my mums car.

Just pulled out a junction pretty quickly without looking as my mum was passing parked cars. Swiped the side of my mum's car pretty hard, which then shunted it into the parked cars.

Both driver side doors are really dented in, and don't close properly.

Front right wheel is buckled, rear one is pretty scuffed.

Front left wheel arch has a massive dent and the wheel is pretty scratched. Along with other bodywork scratches.

Deffo a write off as its only a Rover 25, worth £700???

 

[Airsoft-Ed]

sh*t man, that sucks a bit =[

 

[Wølf]

Must not be a month for rovers.

Ever since i could legally drive ive been driving big chunky offroad equipped 4x4's with dirty great big winch bumpers and roll cages etc and have never managed to hit a deer but as the rangie is off the road at the moment ive had to buy a sh*tty old rover.

After a week of having it on the road a deer runs out and became one with the front end, destroying the wing, headlight and surrounding metal, luckily i managed to straighen the inner wing and get away with finding an outer wing and headlight at the scrappy.

So not only does it have all the lacquer peeling off it now has a green wing as opposed to blue so i now look turbo pikey!

I have said deer in the freezer though

 

[Finius]

eBay people who waste hours of my time asking trivial questions about something I'm selling, only to turn round and say "okay, I'm glad I know all this stuff now, I'm going to buy someone elses thing though cause yours isn't the version I want, despite you telling me early on what version it was and me already knowing I didn't want it, before I started asking you stupid sh*t".

Swear to almighty Thor that some people need slapping.

 

[geoffreym]

Y'know, I thought that the ASCU's were meant to be high end quality upgrade parts? But the wiring they come with is SH*T! Monumentally sh*t! It's made out of some sort of >sh*t< multi-strand tin wire that snaps if you so much as touch it, so I've now had to re-wire and re-solder the motor connectors 5 f*cking times and they STILL keep F*CKING snapping!
I feel more like throwing my M16 against a tree than bothering to do anything with it anymore. I'm going to send it to Patrol Base to get it serviced, shimmed, rewired and everything basically - if I do it myself I WILL smash it against a tree.

if it's any consolation, the ASCU will make the gun feel and fire that much better, had mine since release, and it's still got a trigger response equivalent to a PTW.

as for me, pissed off because "i don't party, and get roaring drunk" every night means i'm a pessimistic arsehole.

 

[Hubert]

Finding at flat.

The guy I'm looking with is FUBARing useless, and to be honest, I don't think he actually wants to live with me. He'd rather live with his ex. I don't blame him, but, FFS, his EX. Not current.

I've done almost all the searching. So much so, he decided that rather than staying and helping me look for a place, he'd be a complete barstool and go on holiday. On top of this, because I've had difficulty getting him to say what he thinks of the flats I'm showing, 6 GOOD flats have been taken before he could even get his arse in gear and look.

 

[Airsoft-Ed]

if it's any consolation, the ASCU will make the gun feel and fire that much better, had mine since release, and it's still got a trigger response equivalent to a PTW.
as for me, pissed off because "i don't party, and get roaring drunk" every night means i'm a pessimistic arsehole.

I did have it working briefly, but the wiring was being sh*t still so I couldn't adjust the motor height, so the gun was screeching like a mother bitch.

The trigger response is impressive though, but the burst function is woefully lower than my expectation, it either doesn't work properly at all (works like a regular auto mode) or only fires 2 shots instead of three. Which sucks, 'cos I bought it almost exclusively for the sake of the burst function.

Is there a way to make the burst more consistent? I'm thinking of cutting the spring down slightly so I'll have to see if that helps.

 

[Monty]

Seeing specialairsoftsupplies still in 'service'

Wanting a job but the manager never getting back in touch

My laptop getting the blue screen

Neighbours screaming at FIFA/Call Of Duty/Battlefield at 4 o' clock in the morning

Chain on my bike coming off.

People asking "why are you so quiet?" when in actual fact, I'm not

Friends telling me to call for a Pizza when they know I stammer (not bad, just stop at certain words)

Codsofters

David Cameron

When someone is typing for more than 10 minutes then just ends up saying 'K'

Snipers on eBay

Wasting money then realizing the thing you just bought is a pile of sh*t

The list goes on.

 

[geoffreym]

I did have it working briefly, but the wiring was being sh*t still so I couldn't adjust the motor height, so the gun was screeching like a mother bitch.
The trigger response is impressive though, but the burst function is woefully lower than my expectation, it either doesn't work properly at all (works like a regular auto mode) or only fires 2 shots instead of three. Which sucks, 'cos I bought it almost exclusively for the sake of the burst function.

Is there a way to make the burst more consistent? I'm thinking of cutting the spring down slightly so I'll have to see if that helps.

I don't know sorry, i've got a systema energy CMB with a M120 spring, and it works absolutely perfectly, and the 3rd burst works really well.

i don't think changing the spring will do anything though.

 

[Finius]

eBay nobbers who buy stuff and then message you saying "I know you said in the sales page that you won't do this/you need this collecting by this date, but could you do this/have it collected after this date". If I wanted to waste my time I'd go find a local dog rescue center, cover my balls with marmite and drop my pants.

 

[Tariq]

i have 300 pounds to last me until september...

And i still need to pay for my bike insurance

 

[Alexb111]

People who post statuses on Facebook and twitter saying they got a first in their 1st/2nd year at Uni when their doing Psychology or Media studies or something.

Do a proper course like Physics or Engineering.

*No offence to anyone that did any such course but it annoys me when I think that if they did my course they'd probably be on a third or worse..

 

[TPI]

its harder than you actually think Alex

 

[Alexb111]

Im not saying its easy but I refuse to accept its the same difficulty as Maths, law or Chemistry.

 

[Tariq]

My house mates were doing Geography and English courses.

They were in uni maybe 9 hours a week???

I was in at least 40 hours :/ (Automotive Engineering)