hey, I want to know how to take apart the Tokyo Marui SCAR-L Stock to check the wiring and fuse, I already know how to separate it from the receiver etc but I've looked everywhere and I genuinely cant figure out how to get the fuse out, I'd appreciate any help on this
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Take apart Tokyo Marui SCAR-L Stock?
- Thread starter Jillten
- Start date
- Thread starter
- #3
already watched the whole video man, nothing on the stock at all, just how to detach it from the receiver
i have no idea why there's nothing on this, i've searched all forms of the web and even the TM manual itself, nothing
Right, it’s really nice and easy.
Remove the butt plate as if you were going to put a battery in it.
REMOVE BATTERY IF STILL INSIDE
Give the connector a gentle pull outwards to remove the black case over the negative wire.
Once you have removed this you’ll see a little groove on the inside of the stock(you can see this without removing the wire case), put a screwdriver in here and gently press outwards to flick it out.
Et voila.
Pic to show it’s possible too.
View attachment 42835
Remove the butt plate as if you were going to put a battery in it.
REMOVE BATTERY IF STILL INSIDE
Give the connector a gentle pull outwards to remove the black case over the negative wire.
Once you have removed this you’ll see a little groove on the inside of the stock(you can see this without removing the wire case), put a screwdriver in here and gently press outwards to flick it out.
Et voila.
Pic to show it’s possible too.
View attachment 42835
already watched the whole video man, nothing on the stock at all, just how to detach it from the receiver
i have no idea why there's nothing on this, i've searched all forms of the web and even the TM manual itself, nothing
Last edited by a moderator:
- Thread starter
- #6
that got it! thank you so much!Right, it’s really nice and easy.
Remove the butt plate as if you were going to put a battery in it.
REMOVE BATTERY IF STILL INSIDE
Give the connector a gentle pull outwards to remove the black case over the negative wire.
Once you have removed this you’ll see a little groove on the inside of the stock(you can see this without removing the wire case), put a screwdriver in here and gently press outwards to flick it out.
Et voila.
Pic to show it’s possible too.
View attachment 42835
replacing the fuse and it's all back in working order again, i cant thank you enough!
i was going insane trying to figure this out for like 2 weeks straight
Similar threads
Share:
