Starter Weapon

That was when they removed the inner barrel, unfortunately, I do not know how effective it will be without the inner barrel, the later models of RS also sadly no longer have real steel rifle barrels.


i find it hard to beleive, that's some very deep rifling grooves for 7.62 if they're bigger than 8.5mm which is a standard airsoft barrel.

hence why i said chamber cut.

 
I might get their bullpup rifle the type 95? 
Real Sword only do the Type 97 which is the export version of type 95 as the type 95 even airsoft is banned for export by the Chinese government but rs type 97 is a good rif. you can do a DIY version of type 95.

i find it hard to beleive, that's some very deep rifling grooves for 7.62 if they're bigger than 8.5mm which is a standard airsoft barrel.

hence why i said chamber cut.
That what was claimed years ago I do believe the rifling was not present all the way just partially.

 
Last edited by a moderator:
Real Sword only do the Type 97 which is the export version of type 95 as the type 95 even airsoft is banned for export by the Chinese government but rs type 97 is a good rif. you can do a DIY version of it. 

That what was claimed years ago I do believe the rifling was not present all the way just partially.


I mean the type 97 wouldn't fit with my kit but still ?

 
That what was claimed years ago I do believe the rifling was not present all the way just partially.


fair enough, possible got the hole off-square, although you'd think even a chinese ak manufacturer could drill a decently straight hole in a barrel.

i could beleive it still had the chamber cut where the hop unit went.

I mean the type 97 wouldn't fit with my kit but still ?


well you could change the kit and run chinese, anything that's not m4 operator is a welcome breath of fresh air :)

 
If you do end up going with a CYMA, note that they tend to come in about 400fps as stock - you'll want to be sure that whatever you get has been downgraded to your site limit, unless you plan to use it as a DMR.

 
fair enough, possible got the hole off-square, although you'd think even a chinese ak manufacturer could drill a decently straight hole in a barrel.

i could beleive it still had the chamber cut where the hop unit went.

well you could change the kit and run chinese, anything that's not m4 operator is a welcome breath of fresh air :)
I could run Chinese ?? good shout 

If you do end up going with a CYMA, note that they tend to come in about 400fps as stock - you'll want to be sure that whatever you get has been downgraded to your site limit, unless you plan to use it as a DMR.


Ill probably downgrade it ?

 
I could run Chinese ?? good shout 
This group https://fareastmilsim.com/ are very knowledgeable on Chinese gear if you decided to go that route 

air enough, possible got the hole off-square, although you'd think even a chinese ak manufacturer could drill a decently straight hole in a barrel.

i could beleive it still had the chamber cut where the hop unit went.
You could be right I not got type 56 from the early productions so unfortunately I cannot confirm or deny if that still the case. 

 
Last edited by a moderator:
It's only because they are currently the only stockist in the UK who have them if you desperate for one you can order direct from Real sword but I can't remember what they were asking for.


I think red wolf and hobby Asia have a few, but the whole import ordeal is too much. 

 
Damn their pricey ?.. almost two cymas worth. But I guess money buys quality  
Personally, the prices shops and second-hand sellers are charging are taking the biscuit in certain case because there are rumors ( as always) that Real Sword will stop making AEGs it drives up prices. 

However, I have bought 8 Real Sword AEGs so I would recommend them wholeheartedly. 

 
Last edited by a moderator:
Personally, the prices shop and second-hand sellers are charging is taking the biscuit in certain case because there are rumors ( as always) that Real Sword will stop making AEGs it drives up prices. 

However, I have bought 8 Real Sword AEGs so I would recommend them wholeheartedly. 


Maybe at some point I'll pick one up 

 
Back
Top