Star L85 rebuild nozzle issues

[Puttees445]

Evening guys.

So like the title says, I'm rebuilding a Star L85 to sell to my mate who's getting back into the game.

In the process of identifying issues, I came across a problem with the original nozzle being worn to buggery, and endeavoured to find a replacement, as its a somewhat non-standard size at 22.25-3mm. I purchased a maxx brand one in 22.3mm and all seemed fine until it got to checking fitment between nozzle and hop unit. The Maxx nozzle has a very hard step about 2/3rds down that effectively stops the nozzle going far enough in. Now it will fit with forcing, but obviously that's no good for a part that needs to move somewhat freely.

My question is, would it be better to try modifying the nozzle to fit, or modifying the hop unit?

Or, even better, does someone know of a nozzle that would fit without issue?

Cheers in advance all

 

[ButcherBill]

My understanding is star = ares so ares parts should fit.

 

[Puttees445]

You're quite right about the STAR=Ares thing, but I've struggled to find spare parts even from Ares, as it's a much older version of the L85 and was annoyingly off-spec from the very beginning . Ares has never gotten back to me about parts in the past, so I'm not keen to try again, only to be ghosted once more, hence trying alternate options.

Edit: That and STAR/Ares parts result in atrocious air seal anyway in my experience.

 

[ButcherBill]

Try this email... [email protected] I had a great response after I had an issue with my L85A3

 

[Puttees445]

Much appreciated! That's the one I tried before but it's worth a shot if nothing else

 

[ButcherBill]

I just told them the part numbers I needed (might be the hard bit for you) and they sent them, I obviously had to pay for them but the price was decent & they even sent 2 by mistake.