Specna Arms - RRA SA-02 Handguard

[Monjardino]

So I’ve bought a Specna Arms RRA SA-P02 which has a barrel hand guard. I’m looking to swap out the barrel for a RIS but I can’t seem to find one.

Does anyone know what I should be looking for and where I can get one?

Thanks in advance!

 

[Lozart]

Do you just want to replace the handguard or do you want to ditch the front sight and delta ring as well?

 

[Monjardino]

Ideally I want to keep the front site and delta ring, I really just want to swap the handguard

Do you just want to replace the handguard or do you want to ditch the front sight and delta ring as well?

Ideally I want to keep the front site and delta ring, I really just want to swap the handguard

I’d like this handguard set up. Keeping the front sight and delta ring

View attachment 145678

 

[The_Lord_Poncho]

This is the kind of thing you are after. Uses the existing delta ring and front handguard mount. Plenty of alternative manufacturers and sources - you could probably find one in the classifieds on here.

https://www.sixmm.com/en-gb/products/cymam014-cyma-kc-type-cqb-ris-rail-handguard-for-m4-aeg

Note that the 'ribbed' side on handguard in the picture is a plastic sleeve that slides on. e.g. https://www.sixmm.com/en-gb/products/gg-knights-type-kac-ris-ras-rail-cover-panel-4pcs-setmarkingdeluxe-ver-blk?_pos=6&_sid=a56fc4159&_ss=r

 

[Monjardino]

This is the kind of thing you are after. Uses the existing delta ring and front handguard mount. Plenty of alternative manufacturers and sources - you could probably find one in the classifieds on here.

https://www.sixmm.com/en-gb/products/cymam014-cyma-kc-type-cqb-ris-rail-handguard-for-m4-aeg

Note that the 'ribbed' side on handguard in the picture is a plastic sleeve that slides on. e.g. https://www.sixmm.com/en-gb/products/gg-knights-type-kac-ris-ras-rail-cover-panel-4pcs-setmarkingdeluxe-ver-blk?_pos=6&_sid=a56fc4159&_ss=r

Yeah that’s perfect!!! So is that essentially a like for like fit size wise?

 

[The_Lord_Poncho]

Generally they should all be interchangeable, yes. QC is sometimes a bit off in airsoft, but usually with a bit of force, hammer, filing, it can be made to fit.

 

[Monjardino]

Generally they should all be interchangeable, yes. QC is sometimes a bit off in airsoft, but usually with a bit of force, hammer, filing, it can be made to fit.

That’s great!! Thank you so much! I’ll go get ordering.

I appreciate your help!

 

[ButcherBill]

If you get a hand guard & it's not a perfect fit don't try to force it, take your time & see where it needs a fettle, they rarely need a hammering.

 

[Monjardino]

If you get a hand guard & it's not a perfect fit don't try to force it, take your time & see where it needs a fettle, they rarely need a hammering.

Great! Thanks for the heads up. Softly softly is the order of the day then.