• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Rubbing alcohol for barrel cleaning

Why not but some white spirit, petrol or similar which you may already have in the house will work if that's what you're wanting to do.

Moved to advice and technical help.

 
Why not but some white spirit, petrol or similar which you may already have in the house will work if that's what you're wanting to do.

Moved to advice and technical help.
Thanks & sorry for putting it in the wrong section, the reason i asked is because its on 70% alcohol & the rest is water but this should dry up quite quick right?

 
Won't be a problem. Every fluid needs to dry, just use it sparingly and repeat several times rather than trying to do it once and using loads. Applies to whatever you're using it on.

 
Won't be a problem. Every fluid needs to dry, just use it sparingly and repeat several times rather than trying to do it once and using loads. Applies to whatever you're using it on.
thanks :)

 
I use rubbing alcohol to clean my barrel, but the stuff I use is 99.99% isopropyl alcohol, it's pretty good and dries pretty much instantly which is always nice.

 
imo do it with alcohol then spray some wd40 on a clothe then pull through then a dry cloth. DO NOT get any on the hop rubber it will screw the rubber up

 
Back
Top