Rifle and Pistol Bundle

[Liam Porter]

I'd imagine it is more practical than this - once you go prone, you're stuck in this.

 

[TPI]

I doubt it you wont be bum rushed and theirs gonna be one mighty draft

 

[M_P]

It's fancy dress... its meant to be stupid

 

[Liam Porter]

Exactly. My L96 has tinsel over it, going to put some baubles on it and some fairy lights if I can find some cheap battery powered ones.

 

[lemon191]

those cracker outfits are soft and bendy you wouldnt get stuck anywhere.

 

[Liam Porter]

Good, and I'll be hard to spot.. no-one will notice a sparkling sniper..

 

[Armourer]

Haha

Turns out i can't come and literally 20 minutes ago, my rifle and face mask arrived.

xD

The rifle is much bigger and heavier then i expected it to be.

All the stuff isn't where i'm used to because i'm used to L98A1/A2 GP Rifles in real life.

The instructions are 70% for the raider and 30% for the carbine (which i've got) which doesn't help

I think i've broken the magazine :/

Plus, one question, is there a cocking handle? Because i only see one thing like it and it's a T shaped metal part just under the sighs in the middle, on top of the rifle. Which in the instructions is labeled as 'Charging Handle'. xD

Sorry

 

[lemon191]

HahaTurns out i can't come and literally 20 minutes ago, my rifle and face mask arrived.

xD

The rifle is much bigger and heavier then i expected it to be.

All the stuff isn't where i'm used to because i'm used to L98A1/A2 GP Rifles in real life.

The instructions are 70% for the raider and 30% for the carbine (which i've got) which doesn't help

I think i've broken the magazine :/

Plus, one question, is there a cocking handle? Because i only see one thing like it and it's a T shaped metal part just under the sighs in the middle, on top of the rifle. Which in the instructions is labeled as 'Charging Handle'. xD

Sorry

the t shaped thing should pull back and on a real rifle that would be the charging/cocking handle for you it will most likly make the dust cover pop open and reveal the hop up

 

[Armourer]

The T shaped thing does pull back, but it's very loose when it does and wobbles around a lot. But it's basically a cocking handle?

And when i pull it back, nothing comes up?

 

[lemon191]

The T shaped thing does pull back, but it's very loose when it does and wobbles around a lot. But it's basically a cocking handle?
And when i pull it back, nothing comes up?

that is the cocking handle yes, the handle might just be a little extra then rarther than being used to hide the hop up. where is yours by the way?

 

[Armourer]

I'm assuming you mean the hop up, but i didn't know but now i've found it.

I had to use my nails to get under a flap which came up easily and showed the hop up on the right hand side. Don't know if this is the right way to do it but i haven't encounter any resistance yet.

Also, how much do you have to wind the magazine up? Feels like i've been doing it for 30 minutes now >:l

 

[lemon191]

the cocking handle should open the cover for the hop up

close the hop up cover and pull back the cocking handle again to see if it works

the mag shouldnt take long at all to wind up you can only wind in about 30ish rounds each time then you wind it

 

[Armourer]

Nope, charging handle does nothing. Doesn't look like the hop up cover is really attached to anything. Just like a spring

 

[Armourer]

This is the manual i have

CM16 Raider- 12

Part on page 2 is what i'm talking about

 

[Liam Porter]

The charging handle on the CM16 range doesn't do anything. You have to use your fingernails to adjust the hop.

 

[Armourer]

Ah okay. Thanks

Also, theres a button. On the right of the rifle big circle sticking out towards the stock. I press it but nothing happens?

 

[lemon191]

The charging handle on the CM16 range doesn't do anything. You have to use your fingernails to adjust the hop.

seems odd all the m4s ive seen, mine included open via the charging handle. seems strange they they didnt do it aswell.

 

[lemon191]

Ah okay. Thanks Also, theres a button. On the right of the rifle big circle sticking out towards the stock. I press it but nothing happens?

that shouldnt do anything at all either so alls good

 

[Armourer]

Thanks guys. Few little buttons and shiz that i don't know what they're for. xD But i really need my battery/charger to test out them all and that'll have to wait til tomorrow.

Mum and Dad said no about this weekend but i'll keep working them with some axle grease and just maybe

One more thing though, i have like 1800 Bulldog BB's from when i use to have my pistol. Does anyone know if they're suitable quality?

 

[lemon191]

Thanks guys. Few little buttons and shiz that i don't know what they're for. xD But i really need my battery/charger to test out them all and that'll have to wait til tomorrow.
Mum and Dad said no about this weekend but i'll keep working them with some axle grease and just maybe

One more thing though, i have like 1800 Bulldog BB's from when i use to have my pistol. Does anyone know if they're suitable quality?

bulldog arent the best but they should be fine to use but id buy better ones in future just give them a quick check over as long as they are smooth and polished they shouldnt do any damage