• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

Retention Holster Fitting Fix

Hamster82

Members
Joined
Jan 2, 2022
Messages
50
Reaction score
44
Hi All, I just picked up a polymer retention holder for my TM Samurai Edge.

I googled a lot to check it would fit but as it’s a slightly odd shape the holster was slightly too tight to fit in - no way it would fit at all.

Couldnt find any help online so decided to take a chance on a bodge fix - I know you can reheat Kydex to alter the shape so figured it may work with polymer, I stuck it in a pot of boiling water for 10 minutes.

When it came out it was still rigid but had some flex to it, managed to ease the pew in a few times then repeated until it fitted properly.

Not sure if this is a common thing but thought I’d post in case it was of any help to someone else with a similar issue.

View attachment 84502

 
Hi All, I just picked up a polymer retention holder for my TM Samurai Edge.

I googled a lot to check it would fit but as it’s a slightly odd shape the holster was slightly too tight to fit in - no way it would fit at all.

Couldnt find any help online so decided to take a chance on a bodge fix - I know you can reheat Kydex to alter the shape so figured it may work with polymer, I stuck it in a pot of boiling water for 10 minutes.

When it came out it was still rigid but had some flex to it, managed to ease the pew in a few times then repeated until it fitted properly.

Not sure if this is a common thing but thought I’d post in case it was of any help to someone else with a similar issue.

View attachment 84502
Well done, had you been asking how to overcome this fitment problem, my advice would have been to do exactly what you did, I've done it myself a few times to get 1911 holsters fit hi-capa pistols. 

??

 
Well done, had you been asking how to overcome this fitment problem, my advice would have been to do exactly what you did, I've done it myself a few times to get 1911 holsters fit hi-capa pistols. 

??
I couldn’t find anything online as it was all Kydex related but ended up figuring what the hell it’s worth a try before I start breakout the tools which was always likely to end badly! ?

 
Back
Top