• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Overspin/Double-firing on first cycle only

Dan Robinson said:
Interesting information.   Do you have a suggestion for the best setting for this feature? 
Click to expand...


Titans have an issue with cheaper/low TPA motors. They may have changed this with later firmwares as the Asters I have don't seem to suffer the same problems.

AB is best turned off if you can and use the bare minimum you actually need, but as far as the Titans go, use better motors (I replaced mine with an ASG Ultimate CNC 28000 and it's been fine ever since).

 
Dan Robinson said:
Interesting information.   Do you have a suggestion for the best setting for this feature? 
Click to expand...


It's only a very small percentage, few years back I've spoken to a few other retailers about this and they have report the same issue.  I've only ever had it reported on 1 of my XT 22TPA motors since selling (about 3 years).  More people using short-stroking in combination of 7.4v batteries seem to have reduced the issue.  

I've come across at least 2 ASG motors that exhibited the same symptoms so I'm not convinced it restricted to any certain grade of motor.

 
High currents can stress etus, some never had great MOSFETs, but also low tpa, poor magnets don't give you great braking, you need TPA to give you braking effort and low tpa give the braking more to do...

 
You must log in or register to reply here.
Back
Top