Novritsch THERMAL anti fog

This is very reassuring.

I also sweat like a pig so the condensation is more of an issue than fog. I’ve just applied the low profile lense to the bolle cobras. They are so comfortable but I agree you really feel the heat on setting 4. I picked up a 2 pack of battery packs that are the exact same with 6000 mAh from Amazon for £30!

That’s weird about the UKARA? I never had to do any of that?

Wonder if it was an error on their end…
 
not sure if it was because the shipper was UPS, oh and good should on the battery pack, just seen them on Amazon.
 
Thanks for your feedback - If I end up getting back into indoor CQB where I can't/shouldn't use my woodland mesh, I'll definitely be investing!

Nov gets some internet heat so often (not all unfounded I'm sure), but it's things like this where the innovation they bring to some products should be applauded.
 
I sweat loads too and after 15 years found that the pyramid goggles and a £20 Ali express unit works great! Think the nov version is basically that rebranded haha
 
I sweat loads too and after 15 years found that the pyramid goggles and a £20 Ali express unit works great! Think the nov version is basically that rebranded haha
Have you got a link? Or are you referring to the older blower units rather than the new thermal demister?
 
Has anyone used the thermal lense anti fog?

I’m considering mask solutions goggles with the fan or the thermal lense as I have some pyramex goggles that the lense fits.

I really struggle with fog as my face gets quite sweaty.

My current pair (5th pair of different brands) are the best I’ve found but still tent to fog up with condensation as I get sweaty towards the end of the day and face protection is never an option as it would fog up which is annoying so I just wear a mouth gaurd to protect my pearly whites haha!

Any input would be great before I pull the trigger on the thermal lenses…
I got the novritsch thermal for my son as he wears glasses. It definitely works for the goggles but his glasses still foged up. He still used the good old anti fog spray on his glasses between games, but the thermal works a treat and its silent.
 
I used my thermal anti-fog yesterday, used with their low-profile glasses. I also had their old fan system setup in my helmet, although never used. Maybe at somepoint but the low profile goggles are so much nicer than larger goggles.

I put it together myself, wasnt too bad. Followed a few online guides and made sure it was clean.

Only thing i didnt do was set the power level, I forgot. It was level 1 for the whole day and i had a few moments where i was i steamed, but a little of standing still or a breeze and it cleaned right up. Next time ill play around with the power settings. I thought it was randonly turning off, but must have been power levels.

Im not sure ill go to the fan one, if im honest but ill keep it on the helmet, for now. Cables were also easy to run and if you have any kind of velcro/NVG carrier etc it works fine.
I have a Ferro style NVG battery holder and actually placed it under the velcro attachment on top.

Only thing i can currently think of is some kind of remote, bluetooth or other kind of remote power changing. but overall im happy so far.
 
You don’t happen to have the link to these do you? Thanks @Reidfc

I picked these up as my exfog struggled over winter and the noise was doing my head in with comtacs. So far two sweaty indoor sessions it’s coped well but I ran it on full power, used 50% in 3hrs or so. Need to try it on a damp outdoors day next time. The parallax effect can be annoying when looking at lights due to the extra lense layer but overall I’m hoping this finally sorts my fogging. Pricey, I wish my turbofans still worked.

My son uses the mask solutions but complains of the stiff wire and the fans presses into his forehead even with the extra foam I added. He never fogs with them though.
 
You don’t happen to have the link to these do you? Thanks @Reidfc

I picked these up as my exfog struggled over winter and the noise was doing my head in with comtacs. So far two sweaty indoor sessions it’s coped well but I ran it on full power, used 50% in 3hrs or so. Need to try it on a damp outdoors day next time. The parallax effect can be annoying when looking at lights due to the extra lense layer but overall I’m hoping this finally sorts my fogging. Pricey, I wish my turbofans still worked.

My son uses the mask solutions but complains of the stiff wire and the fans presses into his forehead even with the extra foam I added. He never fogs with them though.

They are on 20 quid for 2 now too!
 
Back
Top