-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Motors....
- Thread starter Deano96
- Start date
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
High torque 33% faster than lame ferrite aprox
High speed 50% faster but gets warm quickly pulling over m100 springs
Get torque - a good motor available from almost any tetailer
High speed 50% faster but gets warm quickly pulling over m100 springs
Get torque - a good motor available from almost any tetailer
Adam3088
Members
- Jan 28, 2014
- 391
- 222
The zci ones are very good as well, and a bit cheaper: http://www.ak2m4.co.uk/internal-parts/motors-parts
ak2m4
Members
- Feb 23, 2014
- 1,318
- 679
I'm out of these at the moment. There's lots of motor information on the web, I've not tested these myself personally but from what I've been told SHS HT are 16TPA whilst the ZCI HT are 22TPA and the ZCI High Speed is 16TPA. You'll find various manufacturers use different names to rate their motors - Ultra Torque, Balanced, High Speed etc.
I've got a SHS motor order on the way, I'll be selling the SHS motors at the same prices as the ZCI's, with P+P they will work out around £2 more than what you can buy them on Ebay from HK.
I've got a SHS motor order on the way, I'll be selling the SHS motors at the same prices as the ZCI's, with P+P they will work out around £2 more than what you can buy them on Ebay from HK.
Similar threads
