Missing wire (apologies in advance)

[SingleShot]

Hello,

Please excuse the lack of terminology or technical experience. I appear to be missing the cable that connects the rifle (G&G CM16 Raider) that leads from the tube (that is exposed when the stock is removed) to the batteries themselves. From what I recall, that wire did come away quite easily, and looks like a pain to access.

Can anyone point me in the right direction of a replacement wire and/or easier solution?

Thanks.

 

[E21A]

The remaining piece of wire, are there 2 small spade connectors on it? 

Regarding access, there will be a screw holding on the stock tube. Look down the tube and you’ll see it. 

 

[SingleShot]

The remaining piece of wire, are there 2 small spade connectors on it? 

Regarding access, there will be a screw holding on the stock tube. Look down the tube and you’ll see it. 

Click to shrink...

There is no wire at all, as it has come loose and I have lost it, but it was a red and a black wire with spade connectors.

 

[E21A]

I mean the other end of the wire, the part still on the gun. That being the case then you can just make up a new wire. Swap over the deans connectors at the same too.