lowering fps on a co2 pistol

kasaran said:
Heh no. Just silly face thing.
Click to expand...
Click to shrink...
you kids with yer interwebnets! 

kasaran said:
Is it easy to fit? As that would be amazing
Click to expand...
Click to shrink...


...no it is not sadly, there's 2 tiny pins,  one holds like a piston head (PIN1) on, and the other (pin2) stretches a spring quite deep inside, so you need quite fine tweezers to hook the loop of the spring over it.

View attachment 35605

you can take the piston head bit out and push it into the other half of the cylinder assembly, (not pictured), that the spring of doom is attached to, whilst hooking pin2 on the spring, the retrieve it and lock it in with pin1

 
Last edited by a moderator:
CiderPunk said:
you kids with yer interwebnets! 

...no it is not sadly, there's 2 tiny pins,  one holds like a piston head (PIN1) on, and the other (pin2) stretches a spring quite deep inside, so you need quite fine tweezers to hook the loop of the spring over it.

View attachment 35605
Click to expand...
Click to shrink...
 The two rectangular blocks on the right-hand side of your diagram come out yes?

 
yeah it's a shiny metal bit with a yellow O-ring around the end on mine, locked in place with pin1, it's tiny but you just push it through, it's easy to reinstall so take a look

 
Hmmm i may, if i could get one of your printed pins have a go myself.  Its a crying shame to not be able to skirmish it due to 30fps hotness.

Though i havent taken a gun appart yet. So not the most confident about it xD

 
kasaran said:
Hmmm i may, if i could get one of your printed pins have a go myself.  Its a crying shame to not be able to skirmish it due to 30fps hotness.

Though i havent taken a gun appart yet. So not the most confident about it xD
Click to expand...
Click to shrink...


Pop your cherry mate. Take photos on your phone of every stage then follow them in reverse to reassemble.

If I can do it you can do it.

 
Do it! 

worst case you can ship the bits to me and I'll put it back together,  (NO WARRANTY)

i'll print some more tonight and post you a couple, DM me your address 

 
So the new pins came today and i managed to fit it.  

It fired well in the garden afterwards. So i didnt break it.  

Took it to firesupport to borrow their chrono.  First shot was 350fps and dropping down afterwards. Settling at 310.  

So yeah. Now its skirmishable.  So look out all you reds... blues... greens... etc

 
I've got my eye on a nbb 1911 that's hitting around 425 fps, would this trick work on that too? 

 
You must log in or register to reply here.
Back
Top