• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

Low fps could it be cylinder related?

What’s the correct O ring size for the piston and cylinder head ?
Cylinder head is generally 22mm OD, 1.5mm cross section.
Piston head is generally 24mm OD, 2.4mm cross section

AK2M4 sells some slightly larger piston head O rings for slightly larger cylinders; they are 24mm OD, 2.7mm cross section.

 
Last edited by a moderator:
Compression test the cylinder. With the cylinder out of GB with tappet and nozzle fitted. Hold finger over nozzle and push piston down into cylinder. It should stop 2/3 way down when all air is compressed. If it doesn't replace the piston oring. 

 
Back
Top