• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Load-Out / Loadout Picture topic

PopRocket123 said:
I'm planning on doing a similar look with one of these. It's going to need some modifications to make it safe though. I'm swapping the crap lense for mesh and wear my bolle Tracker 2s underneath and install a stiffer spring and a cover for the catch 

View attachment 47599
Click to expand...
I did basically the same thing with one I had as a project , I used a motorcycle helmet visor cut to shape and then stuck adhesive Velcro around the catch , made a small panel out of shaped kydex to go over it and job done . Another thing you can do is drill a small hole horizontally through the top section where it hinges up and put an Allen key in it (a slightly larger one than the hole so it’s a tight fit and won’t come out by accident) no way that’s opening by accident!

Ps you mite be hard pressed to get goggles underneath the visor , I have difficulty getting my normal glasses to sit comfortably and they have quite small frames as well .

View attachment 47617

 
Druid799 said:
I did basically the same thing with one I had as a project , I used a motorcycle helmet visor cut to shape and then stuck adhesive Velcro around the catch , made a small panel out of shaped kydex to go over it and job done . Another thing you can do is drill a small hole horizontally through the top section where it hinges up and put an Allen key in it (a slightly larger one than the hole so it’s a tight fit and won’t come out by accident) no way that’s opening by accident!

Ps you mite be hard pressed to get goggles underneath the visor , I have difficulty getting my normal glasses to sit comfortably and they have quite small frames as well .

View attachment 47617
Click to expand...
Thanks for the tips. Yours looks awesome. It'll be a case of experimenting when I get it

 
What do you use those rails for? Cams & flashlights? Vertical foregrip on each side for your partner to use your head as a battering ram?

 
Last edited by a moderator:
BigBlackGlock said:
What do you use those rails for? Cams & flashlights? Vertical foregrip on each side for your partner to use your head as a battering ram?
Click to expand...
You're right about the foregrips but way off base with why. Have you heard of the term squad bicycle? ?

 
Kit looks ace my friend (bar the mag adapter abomination!) but why does your head look photoshopped on ! ????

 










Put all my gear on and did some target practice today. I was barely moving but the heatwave right now made me sweat buckets. Hydration pouch on the back was a solid buy in this weather. Only thing missing from my kit here is the helmet cover and wiring/PTT for the headset/radio.

Some shooting.



 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

Impulse
Returning to the hobby after a 7 year hiatus
Replies
4
Views
894
Too0ld
T
Adolf Hamster
Hamster’s guide to the (sort of) science of pew pewing!
2
Replies
21
Views
8K
Adolf Hamster
Adolf Hamster
TheFull9
FirstSpear Strandhögg Plate Carrier
Replies
8
Views
6K
TPI
TPI
Back
Top