Krytac PDW MidCaps & Attachments

L

LewisUK

Members
Joined
Aug 14, 2016
Messages
65
Reaction score
5
So, after some debate i've decided to invest into a Krytac PDW (http://www.proairsoftsupplies.co.uk/acatalog/Krytac-MK2-PDW-BLK-KTAEG_TRPDW_BK02.html#SID=39 )

I hate using hi-cap's, and there seems to be a split on what midcaps actually work in the Krytac PDW. Is there any suggestions on mags that will work and feed correctly? (Price is not of an issue really)

What's a recommended sight to put on the gun for CQB and Woodland (and the protective stuff for it)

Will normal 7.4v LiPo brick batteries fit? As i currently have a CyberGun AK, so i have batteries.

There won't be any issue with a longer grip either I assume.

And how should I protect my flashlight from getting damaged?

Sorry for all the 'noobish' questions. I want to make sure I don't go spending money on shit that doesn't work, as im new still to airsoft (only been playing 5 months)

 
Check out the Krytac FaceBook page, there is a thread on there about what mags do and don't work well.

Get whatever sight you get on best with.

The Nuprol Power 1200mAh 30C 7.4v brick LiPo fits well, I ran mine with deans connectors which gave a little more room.

What do you mean by "a longer grip"?

Put your hand over it??? :D (or just don't fit a torch unless it is actually needed).

 
PT247 said:
Check out the Krytac FaceBook page, there is a thread on there about what mags do and don't work well.

Get whatever sight you get on best with.

The Nuprol Power 1200mAh 30C 7.4v brick LiPo fits well, I ran mine with deans connectors which gave a little more room.

What do you mean by "a longer grip"?

Put your hand over it??? :D (or just don't fit a torch unless it is actually needed).
Click to expand...
Click to shrink...
Alright, thanks :P - Found this very helpful list: http://krytac.forumchitchat.com/post/official-magazine-compatibility-list-last-update-081514-7040007?pid=1283935091#post1283935091

I'm using mini tamyia, so hopefully the gun has that connector.. otherwise some diy will have to be done!

On my AK, i have to use a stubby grip to get out of the way of the mag, as the M4 mags tend to be less curved, i'd assume i could have a longer grip

I definitely need a torch, the CQB areas are pitch black in places. Someone was on about like a plastic cover when i last played but i can't remember what he said it was called :(

 
Last edited by a moderator:
it comes as standard with mini tam so you'll be ok.
It is a keymod rail system so you will need a keymod foregrip if you felt it needed one although personally I think that would look very odd especially if you fitted a long one, why do you need a foregrip?

 
Are the mags different to those used on a CRB ?

Ive used both BAMF and PTS EPMs successfully as mid caps on my CRB.

 
Last edited by a moderator:
I'm gonna get some PTS EPM mags for now with the gun.

When it comes to protecting the sight, do i just put some perspex infront of the sight at an angle?

 
depends on which sight.

Killflashes, a flip up perspex screen on the rail or go on ebay and get a piece of lexan cut to size which can be siliconed into place

 
 
Just ordered everything.

Not going to be using a flaslight on gun (either going to tape it or hold it) due to pricing of everything (I spent way too much.) and difficulty finding a working holder.

 
You must log in or register to reply here.
Back
Top