How much to go all black...

[SgtTalbert]

Hi All,

How much roughly would it be to replace the parts on this rifle: http://www.actionhobbies.co.uk/SRC-SR36C-2...-Gun_AQODT.aspx

so that its no longer 'two tone'

Cheers,

 

[Airsoft-Ed]

You only need to swap out the front end and the RIS.

I'd make a guess at around £60ish. Under £100 definitely.

 

[MZKaleem]

and the stock ed,

http://www.airsoftworld.net/src-g36-carry-handle.html

http://www.airsoftworld.net/src-g36c-nylon-fibre-stock.html

http://www.airsoftworld.net/src-g36c-nylon...e-foregrip.html

 

[SgtTalbert]

Cool, roughly £80 with postage

Thanks

 

[Tariq]

Pretty much 50% of the gun... you'd probably save money by selling the TT version and buying a new black one

 

[TheFull9]

Beware though.

You'll never go back.

 

[jcheeseright]

about £8 to take that back to black if the green parts are just sprayed... fairy power spray and a stiff nail brush. Elbow grease of course doesn't have a monetary value.

That's how I would do it of course, failing that, a couple of sheets of fine grain (300 ish) glasspaper, a can of black spraypaint and some decent spray varnish.

Either way, much much cheaper than replacing the parts entirely

 

[dazzer306]

about £8 to take that back to black if the green parts are just sprayed... fairy power spray and a stiff nail brush. Elbow grease of course doesn't have a monetary value.

That's how I would do it of course, failing that, a couple of sheets of fine grain (300 ish) glasspaper, a can of black spraypaint and some decent spray varnish.

Either way, much much cheaper than replacing the parts entirely

[/quote

Yup I've used fairy power spray too just take off parts put in bag spary all over tie up bag leave over night every now anf then give a quick spray and turn about in bag nxt day wash off sprayand use nial brush or a dish washing brush, done this to two of my guns after I got me three games in at combat south

But I think that gun comes in green nylon/fibre stuff and not sprayed so it would have to be sprayed black try findi g some where that will spary 2 tone and when you played your 3 games usd abve method just athoight good luck

Click to shrink...

 

[SgtTalbert]

This isn't for me. a guy at my local site offered this G36c + 2 batteries + 5 mags for £200

My friend who's just got into Airsoft wondered if its worth it in the long run in terms of turning it to 'black' once he is UKARA'd up

Cheers,

 

[Ian_Gere]

PM rschris. he's done it already.

 

[Rogerio134]

Just wait untill you get UKARA mate, two tones look horrendous. Cant wait till september the 8th when i my RIF FN FAL

 

[Hibernator]

about £8 to take that back to black if the green parts are just sprayed... fairy power spray and a stiff nail brush. Elbow grease of course doesn't have a monetary value.

That's how I would do it of course, failing that, a couple of sheets of fine grain (300 ish) glasspaper, a can of black spraypaint and some decent spray varnish.

Either way, much much cheaper than replacing the parts entirely

Click to shrink...

Yup I've used fairy power spray too just take off parts put in bag spary all over tie up bag leave over night every now anf then give a quick spray and turn about in bag nxt day wash off sprayand use nial brush or a dish washing brush, done this to two of my guns after I got me three games in at combat south

Click to shrink...

I'd recommend wearing gloves though - just stripped the tan desert paint job off my M4 so I could give it an urban paint job. Power Spray worked a treat, but all the time spent scrubbing with it on my hands left them peeling like a bad sun burn the next day! Didn't hurt at all, but looked horrendous. On the bright side, my hands now look nice and young having removed the top layer of skin Who needs expensive exfoliants from Boots