• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Holster that fits strange hi capa

W

Wegalaxy

Members
Joined
Apr 8, 2023
Messages
169
Reaction score
32
Probably not with the RMR in the middle.  It might be possible to add a velcro strip to allow room at the mid point but you'd have to experiment with it.

Its probably your best bet

 
Without seeing the end result, I'd say probably not, mid slide rmr will probably rule out most of the wrap around types, including a warrior universal, the amplifier will probably be an issue too. 

You might be better off exploring 3d printed holsters, something that secures like the dtd mk23 holster, but obviously suited for a hi-capa frame. 

 
Last edited by a moderator:
Because of the middle RMR I'd say 99% of the holsters isn't gonna fit.

Kydex Customs make some holsters for flashlight and tracer combo. And you have those RS ones when your pistol is clamped by a specific flashlight like blackhawk omnivore but it has to be cut to house a tracer. If you don't insist on the middle RMR.

An open holster which clamps your trigger guard could be your best bet. Or get a RMR plate which replaces your rear sight but that solution has its own issues.
 

 
Last edited by a moderator:
@Wegalaxy, why not contact dtd, their holster is a great product & to be fair, given the number of customised hi-cappa's usually found on the field, it would be a great opportunity for them to grab a slice of what's a fairly niche market.

 
Last edited by a moderator:
Personally I'd say try the CTM Hi-Capa Holster...

https://www.ctmtac.com/en/product/3

... as these are designed to be used with pistols with all manner of attachments (their AAP-01 version is great). Also if you did buy one make sure to use thread lock on the bolts when you assemble it.

 
Fatboy40 said:
Personally I'd say try the CTM Hi-Capa Holster...

https://www.ctmtac.com/en/product/3

... as these are designed to be used with pistols with all manner of attachments (their AAP-01 version is great). Also if you did buy one make sure to use thread lock on the bolts when you assemble it.
Click to expand...
Looks good, locking function not unlike the dtd, Tbh I'd never seen the ctm one, definitely looks like it would do the job. ?

 
HW Holsters will be able to make one, but you’ll need to send them the pew whilst they work it out.  They’re also one of the few companies I found that’ll make a holster for a USP/P8 with a light on it

 
You must log in or register to reply here.

Similar threads

A
My Basket
2 3
Replies
41
Views
4K
Adolf Hamster
Adolf Hamster
Back
Top