Hi there

[Blackbeard]

I have another question... Would this fit onto the hand guard?

http://www.wolfarmouries.co.uk/airsoft/bb/product.asp?page=product&id=AA203BK

 

[Ian_Gere]

I don't think you can put a rail on the CM handguard, b/c it's designed to split into 2 halves to fit the battery. I think you should stick with an 8.4V battery. There's nothing wrong with 600rpm, but I think you'll get more like 700 anyway. Yeah, a 9.6V will give you a higher ROF, but it will also wear out your gearbox faster, and may cause a failure, such as shredding your piston teeth, knackering your tappet plate spring, or chewing up your piston head O-ring. It's also possible that the gun will not feed BB's smoothly at a higher ROF without modifying the sector gear with a tappet plate delayer.

I realise that all this may sound like gobbledegook and, frankly, until such time as it doesn't, you're best sticking to manufacturers' recommendations. Still, if you must, here is a VP 9.6V. And yeah, the CM will come with a Mini Tamiya connector.

 

[Blackbeard]

I think it may fit on the handguard, because there's holes on the bottom.

Can you reccomend a good 8.4v?

 

[Ian_Gere]

You may be right. If it's important for you to know before you buy, make a thread to ask if anyone knows in the general discussion section. I already linked to an 8.4V VP above.

 

[Blackbeard]

Ok, thanks!

 

[iTTz n00b]

@Blackbeard, I have got some mags and a handguard, pm me and

If you get a 9.6 and you are worried then use semi only

 

[Kaza66]

Can you give me a link to a good battery then?

http://www.componentshop.co.uk/9-6v-1600mah-2-3a-nimh-mini-battery-pack-4x2.html

Same battery, higher voltage.

 

[Blackbeard]

Guys, can you reccomend a similar battery for this? (It's a crane stock one) http://www.zerooneairsoft.com/product_info.php?cPath=268_318_403_494&products_id=5774

 

[Kaza66]

Guys, can you reccomend a similar battery for this? (It's a crane stock one) http://www.zerooneairsoft.com/product_info.php?cPath=268_318_403_494&products_id=5774

http://www.componentshop.co.uk/9-6v-1600mah-2-3a-nimh-mini-cranestock-battery-4-4.html

Should do it.

 

[Blackbeard]

http://www.componentshop.co.uk/9-6v-1600mah-2-3a-nimh-mini-cranestock-battery-4-4.html

Should do it.

Is there a crane stock 1600 8.4 battery?

 

[Kaza66]

Is there a crane stock 1600 8.4 battery?

Of course: http://www.componentshop.co.uk/8-4v-1600mah-2-3a-nimh-mini-cranestock-battery-3-4.html