Help finding a barrel

[rossdzy]

Hey,im looking to upgrade the barrel in my G&P Sr 16 urx, barrel is 11.5 inch which is about 290mm. I cant seem to find one this length! Do i just go for a 300 mm one as it will be still inside the flash hider?

 

[Lozart]

Madbull Python V2 comes in 285mm if you can find one, but you could always cut the longer one down with a hacksaw. Dress the end with a needle file and bob's your uncle.

 

[rossdzy]

Cheers ill go for the 300 one

 

[sunstar]

Why not get one "longer" and cut it to length ??? It's not realy that hard ...

1: A good metal saw to cut it,

2: Then a slightlly larger diameter (eg 8 mm) drill to give the ends a |\ /| end profile ...

3: a bit of high grain sand paper to ensure the end has no filings

4: Cleaning it with a cleaning rod and smooth paper

;-) That's is ... so if you know your way around a tool box then just get a longer one and cut it to size ....

Just make sure you test it by blowing a bb through the barrel before you install it .... (Just to make sure theres no metal dust left)

 

[kriegar]

or leave the length and add a suppressor?