-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Hello everyone, help needed identifying my L96/308/AWP or what ever it is :D
- Thread starter Dready
- Start date
GingerBreadMan
Members
- Mar 16, 2014
- 279
- 98
Tbh, with an un modified rifle, you could probably have a 120 spring in there, I have a 110 but an air seal hop up. I would still cut a coil or two off just to be safe. I'm happy,to help, I've got this information from when I was doing it myself anyway.
This should work and is in stock http://www.fire-support.co.uk/product/laylax-pss-spring-120sp-thin-type-for-apst96
This should work and is in stock http://www.fire-support.co.uk/product/laylax-pss-spring-120sp-thin-type-for-apst96
Last edited by a moderator:
Dready
Members
- Nov 26, 2014
- 12
- 0
- Thread starter
- #23
A guy at work mentioned that his MB01 had a restrictor valve fitted in the bolt assembly/chamber. I will have it apart tonight and have a look, if the bolt in the end of this is missing then maybe I can get something to restrict it without having to faff with a spring.
Found this on a thread on these forums:
- The gun actually has pretty good stock power, perhaps too powerful for the internals, with an FPS of 480 (without velocity reducer) and a poor 270 (with velocity reducer). Being the Version 3 of the Well, it has a removable velocity reducer (comes installed). To remove, you have to take off the cheek rest, remove the bolt and unscrew the reducer from the cylinder head. It's that simple. The way it works is by reducing the air flow, so even though you're at a lower FPS, the spring is still the same, so the strain on the internal is also the same.
Maybe I will get lucky and the velocity reducer is still in there.
http://www.airsoft-forums.co.uk/index.php/topic/5944-well-mb-01-l96-version-3-review/
Found this on a thread on these forums:
- The gun actually has pretty good stock power, perhaps too powerful for the internals, with an FPS of 480 (without velocity reducer) and a poor 270 (with velocity reducer). Being the Version 3 of the Well, it has a removable velocity reducer (comes installed). To remove, you have to take off the cheek rest, remove the bolt and unscrew the reducer from the cylinder head. It's that simple. The way it works is by reducing the air flow, so even though you're at a lower FPS, the spring is still the same, so the strain on the internal is also the same.
Maybe I will get lucky and the velocity reducer is still in there.
http://www.airsoft-forums.co.uk/index.php/topic/5944-well-mb-01-l96-version-3-review/
Last edited by a moderator:
