Having some Mid-Caps Issues

[Nickona]

Hi,

okay so these are my first mid-caps and having some issues.

I've been loading them using hand (don't have a speed loader yet) and only put about twenty bbs in them so far.

anyway when I shoot on full auto a burst comes out and then nothing shoots, same happens on sungle shot.

then when i take the mag out I can see the bbs stock in the tube with the spring not pushing them up as they're stuck in the mag.

They're knig arms mids, there is also a little turny thing at the bottom, could that do anything?

Thanks a lot

Nick

 

[TPI]

Lol do you think you were sent a high cap conversion by mistake?

I just put a bit of lube down the spring and fill it then leave for 10 mins and comeback fire them off then do it all again.

 

[Nickona]

Lol do you think you were sent a high cap conversion by mistake?I just put a bit of lube down the spring and fill it then leave for 10 mins and comeback fire them off then do it all again.

Click to shrink...

yea they're not hi-caps the turny thing need a screw driver.

how would i put lube down it and what type? and btw I have 5 of them

 

[TPI]

Ah well i have ten pmags and just the stuff that you use to clean the barrel but only 2-4 drops and do it until you get a perfect feed.

 

[Nutster]

They're king arms mids

Click to shrink...

There's your problem

Few drops of silicon should sort em out

 

[Nickona]

okay thanks will have a look at getting some silicone

 

[Cameron364]

I think you can buy pure silicone oil from Halfords? Could be wrong?