GHK M4 Maximum Recoil

A

APOModern

Members
Joined
Jun 22, 2018
Messages
18
Reaction score
0
I'm trying to get the kick on my GHK M4 MOD 2 to be as "hard" as possible.  My setup is stock save for a samoon heavy buffer kit and I still feel as though it is a bit lacking in stiffness and return.  What setup would you recommend?  

Note: Efficiency is not my goal, but is a nice bonus if it is still quite usable in-game. 

 
APOModern said:
I'm trying to get the kick on my GHK M4 MOD 2 to be as "hard" as possible.  My setup is stock save for a samoon heavy buffer kit and I still feel as though it is a bit lacking in stiffness and return.  What setup would you recommend?  

Note: Efficiency is not my goal, but is a nice bonus if it is still quite usable in-game. 
Click to expand...
Click to shrink...
 Maybe try a new spring? I'm not great with GBBR's.... Mostly AEG's but maybe you go to a local store and ask about?

 
Absolute max you could get would be a combination of a heavy buffer weight, stiffer spring and steel BCG (aren’t they steel anyway?) and to run it off CO2. 

It would run like shit though. 

 
I went down this road.

I used the Angry Gun heavy recoil buffer with a stiffer spring. If you are trying to stick with green gas, Guarder Black Power Up will increase recoil. Keep in mind that it is winter gas though, so you will get very high FPS in warm weather. IIRC the RATech steel bolt was slightly heavier than stock, but I don't think it is compatible with V2. Didn't change recoil much anyway.

Performance definitely suffers with heavier recoil, but it is still usable.

 
BigBlackGlock said:
I went down this road.

I used the Angry Gun heavy recoil buffer with a stiffer spring. If you are trying to stick with green gas, Guarder Black Power Up will increase recoil. Keep in mind that it is winter gas though, so you will get very high FPS in warm weather. IIRC the RATech steel bolt was slightly heavier than stock, but I don't think it is compatible with V2. Didn't change recoil much anyway.

Performance definitely suffers with heavier recoil, but it is still usable.
Click to expand...
Click to shrink...
What spring did you use?  

 
You must log in or register to reply here.

Similar threads

Brokencreation
G&G / GHK aeg to GBB conversion mod
Replies
3
Views
158
TheFull9
TheFull9
Back
Top