I have recently just bought g&g l85a2 ETU https://www.patrolbase.co.uk/g-and-g-armament-l85-a2-carbine-etu-series-airsoft-aeg and i was wondering what hand guards fit i acquired https://www.fire-support.co.uk/product/madbull-dd-daniel-defense-sa80l85-ris-rail but not only was it extremely hard to get on as if it didn't fit properly but also left no room to get a battery within it.
Gg L85a2 Etu Handguard
- Thread starter jackw7264
- Start date
TheFull9
Supporters
- Dec 17, 2011
- 3,650
- 2,463
I have an ICS L85 but dimensions in this context are gonna be basically identical afaik. I took out the faux gas cylinder and gas piston/spring and there was a decent bit of room up top, though I don't have the gun here to check. If you're using a sub 1500mAh 7.4v nun-chuck there ought to be enough room either side/below the barrel.
Lozart
Supporters
- Jun 24, 2013
- 8,547
- 4,988
TheFull9
Supporters
- Dec 17, 2011
- 3,650
- 2,463
Always love those condescending 3 dots on the end of a sentence. Yes my error there, not familiar with the exact wiring in that exact airsoft gun, if it needs 11.1 then I'm sure a split type around the 1200mah range can still be fitted in and around the Madbull replica of the DD rail, especially with the gas parts removed. Get a ruler to the gun and cross check measurements against any potential battery purchases of course.
Lozart
Supporters
- Jun 24, 2013
- 8,547
- 4,988
Skara
Members
- Oct 20, 2017
- 3,277
- 1,294
Now, I know fuck all about L85s, but the G&G ETU doesn't really accept 7.4s, as the battery protection is set by the factory for a 11.1v.
This means that a 7.4 might get you a whopping 3 bbs before being recognized by the ETU as depleted, cutting the power off.
That's why they recommend 11.1s..
This means that a 7.4 might get you a whopping 3 bbs before being recognized by the ETU as depleted, cutting the power off.
That's why they recommend 11.1s..
Similar threads
