L LordRonin Members Joined Feb 2, 2019 Messages 66 Reaction score 9 Feb 16, 2019 #1 Hey so as you can see in the title my gearbox wont close due to the tappet plate, it wont stay in place when closing anyone have any tips or help? thank you
Hey so as you can see in the title my gearbox wont close due to the tappet plate, it wont stay in place when closing anyone have any tips or help? thank you
I Iceni Members Joined Jul 13, 2015 Messages 1,118 Reaction score 151 Feb 16, 2019 #2 There's a sweet spot on the sector gear where the tappet plate isn't engaged. Look on the sector gear and put the bit that pulls on the tappet plate at about 3 o'clock. In that position, the tappet plate should be at it's most neutral.
There's a sweet spot on the sector gear where the tappet plate isn't engaged. Look on the sector gear and put the bit that pulls on the tappet plate at about 3 o'clock. In that position, the tappet plate should be at it's most neutral.
J johnnyj Members Joined Jul 3, 2009 Messages 273 Reaction score 173 Feb 16, 2019 #3 Also press the nozzle in once as this sometimes helps the tappet to fall in to the rails once the 2 halfs are nearly fully closed
Also press the nozzle in once as this sometimes helps the tappet to fall in to the rails once the 2 halfs are nearly fully closed
L LordRonin Members Joined Feb 2, 2019 Messages 66 Reaction score 9 Feb 16, 2019 Thread starter #4 @johnnyj . @Iceni Thanks for the help, turns out the Tappet didnt have the grooves at the front, dremmeled it and now it works perfectly
@johnnyj . @Iceni Thanks for the help, turns out the Tappet didnt have the grooves at the front, dremmeled it and now it works perfectly
