Gc16 predator won't fire full auto

Nariea said:
It's from germany.
Click to expand...
Click to shrink...
There we go.

If I'm right the German law restricts full auto capable airsoft guns to 0.5 Joules, so in order to achieve higher muzzle energy they're forced to lock their rifs to semi only. The easiest way is to cut a tiny square off the selector plate to prevent it from disengaging the cutoff.

Replace the selector plate and you're golden ;)

 
Skara said:
There we go.

If I'm right the German law restricts full auto capable airsoft guns to 0.5 Joules, so in order to achieve higher muzzle energy they're forced to lock their rifs to semi only. The easiest way is to cut a tiny square off the selector plate to prevent it from disengaging the cutoff.

Replace the selector plate and you're golden ;)
Click to expand...
Click to shrink...
If that's the answer then that is superbly helpful to the OP. Shows that with the right info, the correct answer is not normally far away.  Top info Skara

 
View attachment 42417

well, you're right. 

One of my friends is a mechanic, he says we could take a look at it later, maybe fix it with some 3d printed parts. THANKS!!!
you guys are legit the best!

 
Just to throw out an update. i've change the selector plate, everything went smooth. 
But now it only shoots 2-3 round bursts.. 
i've tried to hold the trigger in semi for 10 sec, but that doesnt seem to work either.

I've observed the mosfet. when ever i am to try full auto. in both "burst and full auto" it flashes a red light 2 times at the end of the shots. like it's cutting of power?

im down at the bottom now, anyone got some knowlegde?

 
Last edited by a moderator:
Nariea said:
Just to throw out an update. i've change the selector plate, everything went smooth. 
But now it only shoots 2-3 round bursts.. 
i've tried to hold the trigger in semi for 10 sec, but that doesnt seem to work either.

I've observed the mosfet. when ever i am to try full auto. in both "burst and full auto" it flashes a red light 2 times at the end of the shots. like it's cutting of power?

im down at the bottom now, anyone got some knowlegde?
Click to expand...
Click to shrink...
What battery are you using?

Because on 7.4s the ETU thinks it's about to die and cuts the current off.

On 11.1s it should work fine.

 
Nariea said:
45 degrees in between the burst and semi it shoots full auto.. soooo... guess im going to drill a little tiny dent so i have 4 selections? 
Click to expand...
Click to shrink...


No, you’re going to need to fix your gun. 

Selector plate not lined up properly would be my first port of call 

 
You must log in or register to reply here.

Similar threads

SullivanTrEE
Seeking Help / Recommendations for MWS GBBR Full Auto Gas Leak & Tech Repair UK
Replies
5
Views
744
n00b1982
n00b1982
Back
Top