G36c ideas
- Thread starter mattypug
- Start date
adam bussey
Members
- Sep 24, 2012
- 656
- 62
take a look at the one in my signature
- Thread starter
- #3
cool, like the stock and suppressor. thinking about angled magpul grip as well as a vertical? might be a bit overkill! and i think the scope is a nice touch
Last edited by a moderator:
- Thread starter
- #5
Hi Dazzer, looking at sights at the mo, whats a cheap but good red dot similar to his pic? do i really have to spend a lot?
Darkness
Members
- Mar 9, 2013
- 2
- 0
Evenin' dude,
Here's mine:
View attachment 6406
It was my first gun and it's still going! Tried to keep it quite simple and keep costs down so found ebay and my local club were cheapest for parts etc.
To give you an idea:
40mm red/green dot sight - ebay: £30ish
G36 4x scoped top rail - local club for sales section: £15ish
Front vertical grip - ebay: £5ish
Flash mags - ebay: £15isn each.
Torch - Wilkos(!): £1.99!
Hope that helps dude!
D
Here's mine:
View attachment 6406
It was my first gun and it's still going! Tried to keep it quite simple and keep costs down so found ebay and my local club were cheapest for parts etc.
To give you an idea:
40mm red/green dot sight - ebay: £30ish
G36 4x scoped top rail - local club for sales section: £15ish
Front vertical grip - ebay: £5ish
Flash mags - ebay: £15isn each.
Torch - Wilkos(!): £1.99!
Hope that helps dude!
D
Last edited by a moderator:
Darkness
Members
- Mar 9, 2013
- 2
- 0
3 bolts to fit it mate, and completely interchangeable so you can go back to the normal iron sights if you want.
Ebay again seem to have them, and they come up very regularly on the zero in forum classifieds
Mine's a 4x magnification, but i believe you can get 2x ones as well.
Ta
D
Ebay again seem to have them, and they come up very regularly on the zero in forum classifieds
Mine's a 4x magnification, but i believe you can get 2x ones as well.
Ta
D
adam bussey
Members
- Sep 24, 2012
- 656
- 62
Tariq
Members
- Dec 14, 2011
- 1,154
- 89
Also there is no such thing as a CV or KV stock. Its simply a V (Varient stock)
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
http://www.airsoft-forums.co.uk/index.php/topic/14005-which-g36/
http://www.airsoft-forums.co.uk/index.php/topic/3820-gun-picture-thread/page-56
Since then I've added a foregrip like this.
If you put a RIS on it, the latch to fold the stock will probably not work properly, that's why, if you look at mine in the Gun Picture Thread, I've added a mini-carabiner and ring-nut.
Edit: ah sod it - new pics:
Uploaded with ImageShack.us
And this is where I bought my carry handle scope.
http://www.airsoft-forums.co.uk/index.php/topic/3820-gun-picture-thread/page-56
Since then I've added a foregrip like this.
If you put a RIS on it, the latch to fold the stock will probably not work properly, that's why, if you look at mine in the Gun Picture Thread, I've added a mini-carabiner and ring-nut.
Edit: ah sod it - new pics:
Uploaded with ImageShack.us
And this is where I bought my carry handle scope.
Last edited by a moderator:
- Thread starter
- #12
great thanks Ian, looks good, i will be on ebay nowhttp://www.airsoft-forums.co.uk/index.php/topic/14005-which-g36/
http://www.airsoft-forums.co.uk/index.php/topic/3820-gun-picture-thread/page-56
Since then I've added a foregrip like this.
If you put a RIS on it, the latch to fold the stock will probably not work properly, that's why, if you look at mine in the Gun Picture Thread, I've added a mini-carabiner and ring-nut.
Edit: ah sod it - new pics:
Uploaded with ImageShack.us
And this is where I bought my carry handle scope.
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
Well yeah Matty, but bear in mind that Adam's and mine are longer than the C versions - his is a KV and mine is a bit longer, but not quite as long as an MG or E variant. It may take a few milliseconds longer to acquire a target with a longer barrel...
But yeah, if you like the look of the RIS, you can get them shorter for a C length G36. If you want a cheaper version of the 551 replica Adam has there are some called "Zombie Killer" on fleabay.
But yeah, if you like the look of the RIS, you can get them shorter for a C length G36. If you want a cheaper version of the 551 replica Adam has there are some called "Zombie Killer" on fleabay.
Last edited by a moderator:
- Thread starter
- #14
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
dazzer306
Members
- Feb 4, 2012
- 409
- 23
Also on both my C and KV (both SRC) the rear sling point I had to file out slightly to get my sling hook in there, looks plastic but the inside is metal of some sort. Was thinking of getting the magpul sling eye which is bolted though body for the rear of the KV but didn't quite know where to locate it,
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
I've had that problem too... but my solution has been to add a 6mm locking carabiner which can clip onto either the sling clip and sling mount, or over the sling. I use a 3 point sling so I've taped the 20mm webbing loop in place on the stock, so it's a 4 point now - for folding the stock - it's more comfortable for me with the mount higher, but when I fold the stock I can unclip it and still have the carabiner mount - quick'n'easy
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
I haven't got around to it yet but I am going to rewire mine so that the battery stays in the stock but with a longer wire from the motor which I will put a couple of layers of black heat-shrink on to protect it from squashing. The longer length will let me put the Deans connector (which is the way forward) and burst wizard mosfet far enough inside the stock to avoid problems when I fold the stock. Actually I might buy a roll of fabric insulation tape of the type used for car/bike wiring looms to wrap the wire in where it goes through the hinge area...
The problem with front wiring on G36's is that you're stuck with a mini battery...
The problem with front wiring on G36's is that you're stuck with a mini battery...
Last edited by a moderator:
Similar threads
