G&G ump advanced gt tracer unit

[oKaLLuMo]

Hi thanks in advanced. I've searched the net for a tracer unit for a g&g ump.. Its shows that they do not make them for this model.

Ive seen a video on YouTube where a guy takes the tip off and threads in a 13cw to 14ccw into the end although this is a different model to mine. 

My ump has well looks like a internal thread in the nozzel. I've tried the 13cw to 14ccw was go big ive tried a 12cw was still to big and tried 11cw and the 11 was too small. Seems like a lot of bother to go through for a tracer unit but where I play its in a old crown court and pitch black. 

Thank you hope anyone can help or have got around it some way. 

View attachment 47769

 

[#blackadder]

I believe the thread is proprietary and only fits the g and g ump quick release supressor. If you can find out what thread is maybe get/fabricate an adaptor . Alternatively use a hop up tracer unit .

 

[Dechande]

I ran into this a while back. In the end I removed the UMG barrel, had the flashider cut off and a 14mm thread added. I then screwed on the flashider that comes with the umg suppressor (so it looks normal) and can use a regular tracer unit as well.

 

[oKaLLuMo]

Thanks mate I've seen a threaded barrel online which you can switch it out but apparently it only fits the hks ump

Click to shrink...

 

[Dechande]

The one you've seen doesn't fit the G&G, but you can get a machinist to thread the G&G barrel, it shouldn't cost much.

 

[oKaLLuMo]

The one you've seen doesn't fit the G&G, but you can get a machinist to thread the G&G barrel, it shouldn't cost much.

Click to shrink...

I tripped the gun down and the barrel seems to be plastic welded in? 

View attachment 48070