G&G AEG CM18 MOD1 for first AEG.

Thing is you need to chrono it

and tbh if she shoots just a smidge over - the best thing is to just correct AoE

as that will bring down fps 10 to 15fps

nothing else - just AoE, use a couple of neoprene or rubber tap washers as you are still running her stock

2nd tooth on piston removed already - tiny file to reduce 3rd tooth

2 x neoprene washers with some super glue should do it (clean cylinder head first then glue on to space piston back)

a slightly reduced piston stroke should give you a drop of 10 to 15fps - plus box or rather piston should love you a little for it

ak2m4 has some mofo new xcortech ones in at under £70 I think

give him a pm and he could do you a deal

sounds a lot but it is something that people should consider if they own more than just the one gun

if you suspect ya gun is playing up a quick chrono will prove ya fps has dropped badly

or if working on gun will quickly show the fps & rof etc... rather than try to guess stuff

If you bought it for say £70 and jack it all in in 12 months, I would reckon you could still get about £50 for it

that £20 loss isn't bad as it saves you waiting to find out at site if gun is ok

or rather it is too hot and can't use it properly or even at all if you can't bring her down a hairline smidge with hop on

You could replace the spring and be exactly the same or higher (doubt it but some springs are a bit under rated fps wise) or pi$$ poor sub 300fps

 
Back
Top