-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
First Rif, First Strip Down!
- Thread starter Zitch
- Start date
I love working on AKs but the v3 trigger and ARL are, as you say, a PITA ?
I have built one up last summer with a Gate NanoHARD, improved sealing (air nozzle, o-ring, bucking and nub) and a Madbull barrel. Cracking little gun that with the weathered paint and wood looks pretty unassuming. I have just done a mod I saw in the wild a few years back, basically take a Scout light, remove the RIS mount and bolt directly through some holes you drill in the upper hand guard! Seems that lack of tactical fore end didn't stop the local guys trying to get all tacticool like the US and Brits they were working along side ?
I have built one up last summer with a Gate NanoHARD, improved sealing (air nozzle, o-ring, bucking and nub) and a Madbull barrel. Cracking little gun that with the weathered paint and wood looks pretty unassuming. I have just done a mod I saw in the wild a few years back, basically take a Scout light, remove the RIS mount and bolt directly through some holes you drill in the upper hand guard! Seems that lack of tactical fore end didn't stop the local guys trying to get all tacticool like the US and Brits they were working along side ?
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,229
ahh the greatest spirit of the ak, if it don't fit imma make it fit
tbh i'm currently hunting for a way to get a wee stub of rail mounted between the gas block and barrel so i can get me 2dp side-mounted there and can go back to the original handguard.
short RIS rail section and two wood screws ?ahh the greatest spirit of the ak, if it don't fit imma make it fit
tbh i'm currently hunting for a way to get a wee stub of rail mounted between the gas block and barrel so i can get me 2dp side-mounted there and can go back to the original handguard.
View attachment 68760
View attachment 68761
Last edited by a moderator:
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,229
dont wanna go drilling into the wood.
really hard to find a pic of what i'm meaning but something like the laser positioning of these:
Zitch
Members
- Dec 23, 2020
- 65
- 2
- Thread starter
- #26
Yea I was thinking about working on the wood to add a rail but I am going to keep it intact so I can swap it if I fancy it and just buy a rail for the front end. I am considering fucking off the side mount and drilling the top plate to add a rail to it for the rds.
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,229
tbh the side rail looks pretty decent as-is.
if it were me i'd lose the torch and if possible the side section of rail.
if you wanna go the tactical route then some repro zenitco on the frontend will give you somewhere to mount a torch to (which will also be more convenient for activation)
if it were me i'd lose the torch and if possible the side section of rail.
if you wanna go the tactical route then some repro zenitco on the frontend will give you somewhere to mount a torch to (which will also be more convenient for activation)
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,229
There are some options, but be careful when picking the repro zenitco stuff as the handguard dimensions on some patterns of ak are different to others and even when it is the "right" type you may need to crack out a file to get it to sit snug.
Zitch
Members
- Dec 23, 2020
- 65
- 2
- Thread starter
- #34
Will do cheers, I don’t mind a bit of tinkering to get them to fit.
put a new a battery in the rds this evening and found out the sight is kaput. On closer inspection the emitter had been all scratched up as if it had been attacked with a small screw driver in the past. Can’t help but start to feel slightly ripped off now but hey that’s the risk with buying second hand.
EDcase
AF-UK patch owner
- Jun 24, 2017
- 3,599
- 1,590
Welcome
Congrats on your new pew and the work you've done on it.
You can get red dot sights quite cheap.
This one is quite good for the price: https://www.amazon.co.uk/Airsoft-Goggles-Tactical-Suitable-Picatinny/dp/B083D2WL7C/ref=cm_cr_arp_d_product_top?ie=UTF8
Or just have a look at our classifieds
Congrats on your new pew and the work you've done on it.
You can get red dot sights quite cheap.
This one is quite good for the price: https://www.amazon.co.uk/Airsoft-Goggles-Tactical-Suitable-Picatinny/dp/B083D2WL7C/ref=cm_cr_arp_d_product_top?ie=UTF8
Or just have a look at our classifieds
Last edited by a moderator:
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,229
i can't find it now, but the pinty 1x30 red dots are pretty decent and look not too bad on an ak (looks almost like a rakurs if you squint really really hard), it's amazing what the chinese can knock together for sub £20 these days.
