Faster trigger response

N

_neardark

Members
Joined
Jun 12, 2019
Messages
12
Reaction score
0
Im on turning my adaptive armament sbr into a dmr build but the semi trigger response is so sluggish. 

im using a 11.1 lipo

ive added a high torque motor

still hasn't made much difference at all?

any suggestions welcome

 
_neardark said:
Im on turning my adaptive armament sbr into a dmr build but the semi trigger response is so sluggish. 

im using a 11.1 lipo

ive added a high torque motor

still hasn't made much difference at all?

any suggestions welcome
Click to expand...
Click to shrink...


A high torque motor with 18:1 standard gears wont make much difference. 

Pair it with 13:1 gears and/or short stroke sector gear and then you'll be cooking. 

 
Its got a burst wizard in it but I dunno if thats absolutely useless the gun is the gears are or what but my specna is so much better in general and it cost a fair bit less. Its annoying the life out of me.

 
HAHA its deffo not that because my specna is firing so fast and smooth and this just feels like clunk clunk 

 
_neardark said:
HAHA its deffo not that because my specna is firing so fast and smooth and this just feels like clunk clunk 
Click to expand...
Click to shrink...




If you don't want to crack open the gearbox then A decent Balanced motor can help in this situation. But its much better to go the 13:1 gears with High Torque motor. 

 
ImTriggerHappy said:
What spring?

What high torque motor?
Click to expand...
Click to shrink...
Click to expand...
Click to shrink...
Its an ASG 30k one I believe? 

The spring is an  ASG M125

Asomodai said:
If you don't want to crack open the gearbox then A decent Balanced motor can help in this situation. But its much better to go the 13:1 gears with High Torque motor. 
Click to expand...
Click to shrink...


Im going to try that when im paid theres a tech on my team that could help me install them. He fitted the motor and the spring.

 
_neardark said:
Its an ASG 30k one I believe? 

The spring is an  ASG M125

Im going to try that when im paid theres a tech on my team that could help me install them. He fitted the motor and the spring.
Click to expand...
Click to shrink...
The 13.1 won't make a huge difference on trigger response they are more for rof. On that spring and that motor it should be reasonably snappy. 

Could be a naff motor, or bad wiring or just over shimmed.

The main thing for trigger response is that the motors torque is good enough not to be slowed on the initial pick up or by the spring tension as it compresses. Your build should be fine on that set up. I normally run a standard gear ratio on DMR builds. 

For the best trigger response you need a precocking mosfet like the gate titan.

 
_neardark said:
Its got a burst wizard in it but I dunno if thats absolutely useless the gun is the gears are or what but my specna is so much better in general and it cost a fair bit less. Its annoying the life out of me.
Click to expand...
Click to shrink...


Plugged into the battery or hardwired to the trigger?

 
You must log in or register to reply here.
Back
Top