E&C M110A1

[BigStew]

Just got an E&C M011A1 that has stopped firing. Put the gun in fire the motor turns a bit the gun beeps and flashes a blue light.:won't do anything in full auto. The manual is no use and Google just brings up battery issues (tried multiple different batteries same issue). Now if it didn't have a MOSFET I would say anti reversal latch, but before I take gun apart unnecessarily anyone got any other suggestions? ( Tried MOSFET reset that didn't do anything).

 

[Lozart]

I've never used the Kestrel stuff but according to the manual:

1. Power On: Motor vibrates 1 time, Blue light blinks 1 time.
2. Jammed: Motor vibrates 2 times, Blue light blinks 2 time.
3. Voltage High (more than 17v): Motor vibrates 3 times, Blue light blinks 3 time.
4. Low Battery (2s: less than 5.3V, 3s: less than 7.2V): Motor vibrates 5 times, Blue light blinks 5 time.

https://drive.google.com/file/d/1abXFgc5OOVSTn33tM2pjt96mkKgRDDwW/view

 

[BigStew]

I've never used the Kestrel stuff but according to the manual:

https://drive.google.com/file/d/1abXFgc5OOVSTn33tM2pjt96mkKgRDDwW/view

Ok so still most likely a anti reversal latch. Thanks.