Dsg Wanker Gun Appreciation Thread

[Adolf Hamster]

Pretty much instant with pre cock 100%

for practical purposes yes.

but this thread isn't really about practicality because good enough can be achieved with a much milder build.

 

[Alimcd]

I don’t get the appeal of pre-cock. I’m a space cadet at the best of times, the odds that I’d store something with the spring under tension are way too high, hence going DSG to get the fast response without having to precock the piston 

 

[Adolf Hamster]

I don’t get the appeal of pre-cock. I’m a space cadet at the best of times, the odds that I’d store something with the spring under tension are way too high, hence going DSG to get the fast response without having to precock the piston 

must admit i do kinda wish more guns had the ability to de-tension them.

can always burst on auto till it gets to that sweet spot of being unsprung.

 

[Alimcd]

must admit i do kinda wish more guns had the ability to de-tension them.

On the AK build, I put in a Modify ARL for this very reason. The Modify ones have a flat head slot on them so you can detension the spring. Total faff though as you have to remove the pistol grip to get to it...

Not figured out a non-kludgy way of doing it on the M4. A M160 under tension can be quite exciting if you aren’t expecting it, even with a QSC!

 

[PopRocket123]

On the AK build, I put in a Modify ARL for this very reason. The Modify ones have a flat head slot on them so you can detension the spring. Total faff though as you have to remove the pistol grip to get to it...

Not figured out a non-kludgy way of doing it on the M4. A M160 under tension can be quite exciting if you aren’t expecting it, even with a QSC!

I guess if you don't mind having a 3-5mm hole in your grip you could drill a hole to get a jewelers screwdriver in there to decock it. Not the most elegant solution but it's not the most elegant gun. 

 

[Alimcd]

but it's not the most elegant gun. 

Ah, but with all the chrome crap on it it IS the ugliest! I think an Allen key or screw driver permanently hanging out the side may actually improve the looks!

With the current build (tempting fate here) I shouldn't need to have to decompress the M4 gearbox. The Jefftron is set to "14%" active break that with the high torque motor seems to perfectly stop after each cycle. By writing that down, it's not going to work anymore...

 

[ziCk_]

Poprocket, I don’t know who’s M4 wanker gun is uglier. It’s a close run race!  

My AK wanker gun seems almost tasteful in comparison

View attachment 62772

Where did you get that gas tube with Picatinny rail? Me wants!

 

[Alimcd]

Poprocket, I don’t know who’s M4 wanker gun is uglier. It’s a close run race!  

My AK wanker gun seems almost tasteful in comparison

View attachment 62772

Where did you get that gas tube with Picatinny rail? Me wants!
Expand  

It’s an LCT part, I want to say PK-59. I couldn’t find any left on these shores so mine took the long boat from Airsofttiger in Hong Kong.

I think it’s great having a sight so low. The top rails and B18 Zenitco’s are so high up that aiming feels unnatural - not the case with the railed gas tube