CZ P10c CO2 magazine venting.

[Anotsu]

Just picked up a CZ P10c and having an issue with the magazine just venting the gas. 

Any fixes tips or tricks for this much appreciated? 

The gas routers look fine and the pistol itself isn't that old. Are the gas routers in this bespoke and where is best to pick up the spares? 

Cheers.

 

[Cr0-Magnon]

Have you sprayed silicone on the knocker valve while pushing it in several times?

 

[ButcherBill]

Have you sprayed silicone on the knocker valve while pushing it in several times?

Oo-er Missus

 

[Anonymoose]

Have you sprayed silicone on the knocker valve while pushing it in several times?

Thank you for this tip. I had one doing the same thing. Gave it a drop of silicone and it sorted it. ??

 

[Cr0-Magnon]

Thank you for this tip. I had one doing the same thing. Gave it a drop of silicone and it sorted it. ??

Awesome! Yeah, quite often they get stuck in just enough to release gas. This should be anyone's first process, if their mag is venting from the top. Applies to green gas mags too (although they suffer from it less, if kept gassed).

 

[Anotsu]

Awesome! Yeah, quite often they get stuck in just enough to release gas. This should be anyone's first process, if their mag is venting from the top. Applies to green gas mags too (although they suffer from it less, if kept gassed).

Thanks I will give this another go. But I have soaked every part of the mag possible in silicone. 

Still vents the entire contents of the capsule on piercing!