CYMA CM 126

[Leeeeee]

Hi I’m new to Airsoft and this forum, I could use some help please!

i want to spray the alloy top of my CYMA CM 126 pistol, it will still be two tone but really don’t like the blue!!

can anyone advise how I take the auto/single shot switch out, it would make for a much better paint job

thanks

Leeeeee 

 

[Shamal]

Hello Leeeeee welcome.

Was gonna say Hi Leeeeee but sounded bit wrong. I mean, highly what????

Cant help with your question? but somebody here will know?

 

[Rogerborg]

I wouldn't bet on it, AEPs aren't particularly popular.

And, er, sorry, don't know.  I've got a CM.123 with the selector on the frame, and wouldn't like to guess how the 126 has it fixed in the slide. What I will bet is that it'll come apart, as there's nothing on the 123 or 127/030 that's permanently attached: everything is screw out, push or, or wiggle out.

 

[Leeeeee]

Thanks Rogerborg, I’ll give it a push and a wiggle!

 

[Clanktank]

You should have got a parts diagram with the pistol that should give you some idea.
To me it looks like a simple philips screw inside, take out the silver arm, and it should come off. Looks like a spring and ball-bearing in there as well, so just be careful they don't ping-fuckit into oblivion.

 

[Rogerborg]

Looks like a spring and ball-bearing in there as well, so just be careful they don't ping-fuckit into oblivion.

Click to shrink...

Magnets, magnets, magnets.

View attachment 62448

 

[JSwan]

From memory (I had one years ago) turn the slide upside down and there should be a small grub screw which holds the silver arm in place, once the grub screw comes out carefully slide the arm out as there’s a small spring and piece which holds the selector in place, then repeat in reverse on the way back! Hope that helps