CA M15A1 Not Working

[ollieconnell]

My CA M15A1 is Not Working...

The only thing i can see is wrong is the bolt under the pistol grip leading to the motor is missing, could this be the problem?

 

[Rock-climby-Dave]

does it sound like the motor is spinning freely or grinding a lot?

 

[ollieconnell]

does it sound like the motor is spinning freely or grinding a lot?

it dosen't shoot at all but it makes a clunk that i know from experience that the gun is working but somthing is stopping it

 

[JerseyRider]

Yer sounds like the motor isnt meshed with the gears properly taye the pistol grip cap off and see if the is a spacer inside

Its ethier in the cap or attached to the back of the motor

 

[Deva]

Either way you're going to want that bolt back.

 

[ollieconnell]

the motor is spinning freely so?

 

[Deva]

So you need to get the bolt back in to raise the motor back up to it's correct position.

 

[ollieconnell]

So you need to get the bolt back in to raise the motor back up to it's correct position.

can i buy one somewhere?

 

[Deva]

I'm afraid I don't know the length/thread type of what you need. Hopefully someone else might.

 

[gooodvibes]

just buy a whole new base plate or an entire pistol grip set that normally comes with its own base plate.

trying to find just the bolt will be ###### near impossible.