• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

British Forces weapons

Mtemprell said:
Question does anyone know if a rs hand guard will fit on vfc mp7? Wanting to make an Iranian embassy spec mp5 out of my newly acquired gun. 

View attachment 153822
Click to expand...


As far as I'm aware, yes a real handguard will fit a vfc gbb. 

All other makes and AEGs need an adaptor, as receivers are too short. 

If you can find one, vfc do the correct claw mount. 

As for the torch and torch holder. 

The real torch used is a Streamlite SL20. 

And the holder, there is a guy on Facebook called steve leggett. How makes and sells a very close replica to the real thing.

Obviously it's down to your finances and how accurate you would like to go. But a suggestion if I may!....  if that's your MP5 in the pic, I would suggest finding the older style A3 type trigger group too. 

 
Darkmikey22 said:
As far as I'm aware, yes a real handguard will fit a vfc gbb. 

All other makes and AEGs need an adaptor, as receivers are too short. 

If you can find one, vfc do the correct claw mount. 

As for the torch and torch holder. 

The real torch used is a Streamlite SL20. 

And the holder, there is a guy on Facebook called steve leggett. How makes and sells a very close replica to the real thing.

Obviously it's down to your finances and how accurate you would like to go. But a suggestion if I may!....  if that's your MP5 in the pic, I would suggest finding the older style A3 type trigger group too. 
Click to expand...
Cheers for the advice. I definitely do aim to buy the SEF trigger mech. I have my eye on one over on used Airsoft if it's still available come pay day. I shoot cqb alot so burst is not a necessity for me. 

I knew this forum wouldn't let me down on any info I needed. Thanks guys. 

 
Mtemprell said:
Cheers for the advice. I definitely do aim to buy the SEF trigger mech. I have my eye on one over on used Airsoft if it's still available come pay day. I shoot cqb alot so burst is not a necessity for me. 

I knew this forum wouldn't let me down on any info I needed. Thanks guys. 
Click to expand...


If you do swap to SEF i'll buy your burst pack to put in my K. (If you want to sell it.)

 
Anonymoose said:
If you do swap to SEF i'll buy your burst pack to put in my K. (If you want to sell it.)
Click to expand...
I'll keep you in mind. I was planning to save it, 1 as a spare and 2 so if I want to run it A5 spec I have that ability. But I'll let you know bud once I buy a SEF trigger housing. 

 
Just another quick one. Does anyone know anywhere in the UK to purchase a rear sight tool? Only ones I can find are from the usa and not sure what the rules are on importing these. 

 
Mtemprell said:
Just another quick one. Does anyone know anywhere in the UK to purchase a rear sight tool? Only ones I can find are from the usa and not sure what the rules are on importing these. 
Click to expand...


I think my marui came with one. I'll see if it fits the VFC and if i have a spare.

 
Darkmikey22 said:
As far as I'm aware, yes a real handguard will fit a vfc gbb. 

All other makes and AEGs need an adaptor, as receivers are too short. 

If you can find one, vfc do the correct claw mount. 

As for the torch and torch holder. 

The real torch used is a Streamlite SL20. 

And the holder, there is a guy on Facebook called steve leggett. How makes and sells a very close replica to the real thing.

Obviously it's down to your finances and how accurate you would like to go. But a suggestion if I may!....  if that's your MP5 in the pic, I would suggest finding the older style A3 type trigger group too. 
Click to expand...
Just to clarify, rep handguards fit perfectly on the VFC MP5 - I’ve tested it with both the early skinny handguard, as well as the aftermarket surefire one (pictured as proof!). 
Additionally, VFC is also compatible with all (that I’ve tested so far) real optics and optics rails too, and I’ve tested quite a niche range. 
 

Side note- if anyone is after the burst lower, I’ve got the original one off my MP5 that I’d be willing to dig out and part with. 

View attachment 153952

 
mightyjebus said:
Seen these 2 at the REME museum in Lyneham at the weekend. Maybe a little project for Darkmikey22 :)

View attachment 155028

View attachment 155029
Click to expand...
Hahaha. I would love to do an EM2 and the later sa80 prototype (as pictured). But time and funds aren't as free anymore. Struggling to keep up with issued kit. Let alone prototype stuff, haha. 

And yes.... the plastic definitely looks mouldy. Maybe they should give to me to look after...

 
So, just to add. 

I've since had a few new pieces join the collection. 

The L130A1

This is the 7.62mm variant of the FN minimi. 

This system was only ever in use with UKSF/SFSG, and has been used for some time. These are usually seen with a TA01 with RMR, LA5 peq and a green LBT box mag. 

There are a few differences between the UK version and US version (MK48). 

GAS BLOCK/REG

The US version uses the 7.62 type, while the UK version uses the older Minimi type, with even a MK1 type gas regulator knob. 

BIPOD

US version uses the new improved style, while UK uses older type. 

RAILED HANDGUARD

There are 2 US types. The improved tri rail or the older MK46 style over barrel rail. 

The UK version is similar to the KAC type tri rail. 

BOX MAG MOUNT

Now I'm not entirely sure what this plate is there for. 

But the US version has a 2 holed plate, that sits underneath the feed tray. This is not present on the UK version. 

MARKINGS

The US version has MK48 markings on the right sight, just before the stock. 

The UK version just has the standard minimi type markings, but marked for 7.62. 

My version is a Lambda defence version. 

Has a few things that need addressing 

A few holes left in the receiver from manufacturer. Clean up some of the rusty parts. Spray the receiver a satin black as issued. 

Try and source a green box mag, or try dying the one I have potentially. And to source a TA01 acog. 

Next up. 

M79 

Some people don't realise, this particular weapon has been used by the British since the 70s in Northern Ireland, and one or two pictured during the falklands. 

These were later replace by the HK69 launchers. 

The British version came with a fibre glass stock. Not the wooden one issued to US forces. Most were seen using SLR slings too. 

Lastly. 

The L109A1.

It's a SIG P230. This was sigs answer to the Walther PP/PPK & P5. 

This was issued to SAS as a concealed carry both on covert ops and for personal protection when in plain clothes. 

Other than that, not alot is known about this little pistol. There were also rumours this was issued to helicopter crews along with the Walther P5's. But the guys I know, who were in the RAF, only ever saw the walther P5's issued at the time. 

Mine is the old KSC P230JP version. 

Only down side, is that it's plastic bodied.

But for a small pistol, is extremely comfortable. 

I'm really not sure what to do with this, other than leave it stock. As haven't seen any pics of issued ones to getting it looking authentic. 

View attachment 155099

 
Not sure if I'll make any more Airsoft EM-2's - the pic. is of the prototype I've made - its cnc Aluminium and Walnut and took a lot of time/effort/money to create, and I don't think there's a lot of demand out there that would make it worthwhile. But I learnt a lot making it, and it did gain me the very real privillege of meeting with Jonathan Ferguson and getting to handle (cuddle?😁) several examples of the real thing. Worth it just for that!

 
Last edited by a moderator:
@MSSNAFUif you do make any more EM2s I'd be absolutely desperate to grab one from you!

I'm a gas blowback man myself, but if it means getting an EM2 I can stomach AEG or HPA 🥺

 
You must log in or register to reply here.

Similar threads

B
WE Sig F226 MK25
Replies
10
Views
931
Jaylordofwaargh
Jaylordofwaargh
T
Making and AltHistory kit, need advice about NATO 90's/00's gear.
Replies
6
Views
2K
ButcherBill
ButcherBill
K
New well pro dig gbbr . Hpa ready
Replies
3
Views
225
GiantKiwi
GiantKiwi
TheFull9
Plastic AR with M16A2 receivers?
Replies
1
Views
475
Lozart
Lozart
Klesin
Private sale to the US
Replies
13
Views
645
Klesin
Klesin
Back
Top