Army Armament R45 detonics hop unit

[max_jarvo135]

Hello all, doing a bit of a mess around build with this little pistol. I was going to go down the airtac hpa adapter route for it as I have read the gas efficiency on the small mags are utter rubbish. Then I'm going to stick a good, handy zci barrel (138mm) then slap a suppressor over it, 60 degree flamingo bucking............ anddddd then I got to the dilemma of the hop unit. I just cannot find details on it anywhere. I am convinced I've searched the entire web for stuff about it but I've got zero luck whatsoever. What I wanted to do was stick one of those TTI infinity hops in it (the 1911 ones) as it kinda does class as a 1911....... but also kinda doesn't. I was worried about compatibility with the hop unit as its obviously a very small replica so I was unsure if it was a unique type. I was just wondering if any detonics owners or just brilliant people with brilliant knowledge would be able to solve my dilemma, or suggest options/opinions with upgrades as I'd like this to be my little "pocket sniper" if you get what I mean, and I know its possible because I spoke to a random fella in a shop about it before as he done it . Any replies are greatly appreciated, Cheers

 

[Ronin0033]

Pretty sure this will just be a standard 1911 type hop. The externals are shorter, but the inner workings should be standard 1911 stuff.

The Guarder 1911 one is listed as working for the Detonics too, so go for it.

 

[max_jarvo135]

Pretty sure this will just be a standard 1911 type hop. The externals are shorter, but the inner workings should be standard 1911 stuff.

The Guarder 1911 one is listed as working for the Detonics too, so go for it.

Click to shrink...

Thanks for the advice, greatly appreciated. I will look into that Guarder hop and do some digging. Only concern is heavier bbs as I wanted to run 0.36g+ in it. I know the TTI will do it with ease.....but the risk is that it won't fit. Do you know if the Guarder hop would run atleast 0.36's well?