• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

AR AEG Mags - Best weight:capacity ratio

TheFull9

Supporters
Joined
Dec 17, 2011
Messages
3,571
Reaction score
2,341
In order to have the option of running sans any actual gear, I've been looking around for products to fit the above criteria and I'd like to hear folks' findings and experiences.

Not looking to have a giant drum or anything and use an M4 as a machine gun/bb hose, but I usually have about 5 mid-caps on me with 120 each so looking for similar capacity but at minimal weight. Since the gun in question will also be a specific lightweight build and obviously mags are part of that.

Couple of options so far as examples, plastic hi-caps are the obvious initial choice here. Trying to get that best result in terms of the ratio mentioned but also look at least fairly realistic and be built to a sufficient quality such that my ammo feeding device won't let me down (as the plan is not to be wearing a rig to carry any spares). A flash mag would be ideal too, since to my knowledge they're the fast winding hi-cap? Haven't really used one since about 2007 so again experiences and other input would be great.

A couple of these linked together seem like perhaps the top option:

https://www.evike.com/products/52410/

This is the best ratio of weight to capacity I've seen, but the real ones are notoriously unreliable which I think would probably carry over to an ARES product which I'd best is made of thin and flimsy plastic (but interested to hear any related experiences of course):

https://www.redwolfairsoft.com/magazines-ares-aeg-ares-900rds-magazine-for-m16.html

 
Tbf given how little Pmag style midcaps weigh, the BBs you load into it end up weighing about as much lmao. 

Feel like it'll be quibbling over grams and you're probably best looking at feed reliability and capacity.

 
A bit late to the pary, but Lonex flash mags are your best bet.

I recently replaced the ones i bought in 2016, they're still working after almost 10 years of absolute neglect (leaving them with springs compressed for weeks, they're rusty to all fuck) but never skipped a beat.

360 round capacity per mag, so two mags will be plenty.

Battle rattle is a thing only if doing gymnastics while playing, otherwise they will only rattle if almost completely empty, and only if you REALLY shake the gun.

I pick metal mags over plastic because they're thinner and fit all the pouches, whereas polymers are thicker and ribbed (for your pleasure) and for example don't fit my genuine mayflower gen 4.

 
A bit late to the pary, but Lonex flash mags are your best bet.

I recently replaced the ones i bought in 2016, they're still working after almost 10 years of absolute neglect (leaving them with springs compressed for weeks, they're rusty to all fuck) but never skipped a beat.

360 round capacity per mag, so two mags will be plenty.

Battle rattle is a thing only if doing gymnastics while playing, otherwise they will only rattle if almost completely empty, and only if you REALLY shake the gun.

I pick metal mags over plastic because they're thinner and fit all the pouches, whereas polymers are thicker and ribbed (for your pleasure) and for example don't fit my genuine mayflower gen 4.


+1 for metal Lonex flash mags.

Plus, the polymer ones have a sliding baseplate which eventually you will loose, whereas metal ones have a pivoting one which stays in its place.

EDIT: I'm dumb and didn't remember the term 'baseplate' lol

 
Last edited by a moderator:
Back
Top