Aks74u B19

Davegolf

Davegolf

Members
Joined
Sep 22, 2009
Messages
2,103
Reaction score
850
Hi all, can anyone confirm does the Zenit B19 / B19n fit the AKS74U?

Obv with the B11.

Cheers

 
Asomodai said:
Depends on the brand. E&L? No not without a fair bit of modification. 
Click to expand...
Click to shrink...
Hell, I had to file down my LCT clone B11 to fit my LCT! And this was after screwing up a real steel one (got it to fit solid but messed up the alignment for the B19N ?)

 
Shaydee said:
Hell, I had to file down my LCT clone B11 to fit my LCT! And this was after screwing up a real steel one (got it to fit solid but messed up the alignment for the B19N ?)
Click to expand...
Click to shrink...
Especially the E&L as it's handguard is an extra 1/2 to 1 inch longer on the AKS74U then any other brand! 

 
Last edited by a moderator:
Asomodai said:
Especially the E&L as it's handguard is an extra 1/2 to 1 inch longer on the AKS74U then any other brand! 
Click to expand...
Click to shrink...


afaik isn't the e&l meant to be closer to RS spec than the other versions?

as i've mentioned before the rule with ak's is "if it don't fit imma make it fit"

 
Last edited by a moderator:
Adolf Hamster said:
afaik isn't the e&l meant to be closer to RS spec than the other versions?

as i've mentioned before the rule with ak's is "if it don't fit imma make it fit"
Click to expand...
Click to shrink...


I thought that was the case with the stocks. They use the larger pins like the RS stuff. 

The E&L handguard is longer then even the RS to fit in all the gubbinz I believe, But what gubbinz that is, is anyone guess. 

E&L are also great at replicating RS "knackered alignment" of the front sight with the receiver/rear sight. All three of mine are off. Deploying the hammer to the AKS74U and a buttload of retention compound to massage it into the right place on Thursday. 

 
Last edited by a moderator:
I was looking to fit em on an E&L one, can anyone confirm - are they actually longer?

Il be using a RS Zen B11.

I appreciate they all need “tuning” but you can’t mak a hand guard longer! ?

 
Asomodai said:
I thought that was the case with the stocks. They use the larger pins like the RS stuff. 

The E&L handguard is longer then even the RS to fit in all the gubbinz I believe, But what gubbinz that is, is anyone guess. 

E&L are also great at replicating RS "knackered alignment" of the front sight with the receiver/rear sight. All three of mine are off. Deploying the hammer to the AKS74U and a buttload of retention compound to massage it into the right place on Thursday. 
Click to expand...
Click to shrink...


not sure on the sidefolders, the only ones i've met that had RS stocks on them were pt5's on standard trunnion

i know their full length ak's fit the rs handguards with very little tweaking  but i've not tried it on one of their u's, but granted they are longer than cyma/jg handguards.

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

CallumT20
VFC AKS74u
Replies
6
Views
386
Lyndication
Lyndication
Back
Top