Aeg Locking on Semi-auto, Need Help

[Not DMR]

Hi,I have a KWA Ronin T10 that I bought a few months ago, and it locks from time to time on semi-auto since the first day I played with it. I have done a lot of mods, and I will list all of it. Every time the AEG locks, when I switch to full auto, it works normally and cycles back again.Here is everything I have done to the AEG so far:1- 11.1V 20c Battery2- Gate PicoAAB mosfet (active braking) with total wiring replacement3- Rocket High Torque motor (16 TPA)4- 6.01 barrel5- 60 degree bucking6- Relub of gearsI still get locks on semi-auto from time to time. I just don't know what else I could do, if you guys could please help me solve this, I would really appreciate it.

 

[Adolf Hamster]

Imma place a bet that it's the active brake stopping the cycling too soon.

 

[Not DMR]

Imma place a bet that it's the active brake stopping the cycling too soon.

Click to shrink...

I started to think it was the AB too, but isn't it supposed to prevent the locking instead of causing it?

 

[Adolf Hamster]

I started to think it was the AB too, but isn't it supposed to prevent the locking instead of causing it?

Click to shrink...

nope, it's supposed to prevent overspin, but you need a fast setup for that to be a problem.

 

[Not DMR]

nope, it's supposed to prevent overspin, but you need a fast setup for that to be a problem.

Click to shrink...

Ok, i will change the mosfet and see what happens

 

[Adolf Hamster]

Ok, i will change the mosfet and see what happens

Click to shrink...

Even as a tester try without a mosfet to see if that really is the issue.

Its why i tend to reccommend nanasr for basic mosfet duties.

 

[Not DMR]

Even as a tester try without a mosfet to see if that really is the issue.

Its why i tend to reccommend nanasr for basic mosfet duties.

Click to shrink...

I bought the X-ASR, lets see if it changes anything

 

[Not DMR]

Even as a tester try without a mosfet to see if that really is the issue.

Its why i tend to reccommend nanasr for basic mosfet duties.

Click to shrink...

Hi, just want to let you know that replacing the mosfet fixed the problem, thank you

 

[Adolf Hamster]

Hi, just want to let you know that replacing the mosfet fixed the problem, thank you

Click to shrink...

good to know man, glad it was the right solution.