11.1v lipo in my standard ca90

[Eenthuncob]

Hi guys.

I know this has already been asked somewhere on the internet but my search hasn't really come up with anything.

I have a standard CA p90 I love the gun and it's great for cqc but I've only got 1 1600nimh 8v battery and it doesn't last very long so I'm looking to get a lipo I'd like a 11.1v maybe a 7.4 as well for when I'm not after rof, so I understand I'll need a mosfet so a question is what mosfet I don't need any thing amazing something that'll do the job, also when it comes to lipos I'll get a good charger with balancing but one thing I'm not sure about is the discharge rate the common seems to be 25C I take it the higher the discharge the faster rate of fire? Sorry if you've answered this all before but I don't want to go and throw money away on some bits that won't be worth it.

Thanks guys Matt

 

[Monty]

Stick with the 7.4, 11 will burn out the contacts eventually. Maybe even strip the piston/gears.

 

[Shizbazki]

If your not after ROF then stick to 7.4v Lipo, you wont need to install a MOSFET or anything else you can use it stock

NOT like my TM P90, shimmed, G&P M120 high Speed motor and MOSFET with an 11.1v Lipo i got an insane ROF of 30RPS, totally impractical since that would rinse a single P90 mag in 2 secs.

 

[Eenthuncob]

Thanks guys will just get a 7.4v I'll still get better rate of fire as well. Will get one order straight away. Any recommendations?

 

[Brauster]

These guys are excellent.

http://www.componentshop.co.uk/batteries/airsoft/li-po-packs

 

[Shizbazki]

These should fit quite comfortably in to the gun:

http://www.vapextech.co.uk/batteries/airsoft-batteries/li-po-packs/airsoft-7-4v-1300mah-30c-lipo-battery-vapextech-lp301/