Search results for query: *

Our local site is , fortunatly , very inclusive . We have some regular players with various disabilities who everyone keeps an eye out for during games . And quite a few ladies who play quite often too. Play well and you're made welcome If someone is being a dick word tends to get around and...

Would have been an autobot rubber most likely , that's my usual go to .

If it feeds without the body pin in and when you drop a BB in then my money is on something becoming misaligned when the pin pulls thr top reciever down tight . Try a different hop unit and see if that gives you more clearance .

Fitted a Crazy jet and M/L rubber to mine and a mate's . Took a bit of fiddling and adjusting , but all went back together fine . Pinched up the C clip that comes with the rubber a bit to improve the seal.

Does it fire if you drop a BB dirsectly into the feed tube ? Could be a misalignment issue .

Presumably it's a DMR semi locked , so will be a higher limit .

https://highpressureairsoft.co.uk/products/double-eagle-noveske-n4-ghetto-blaster-7-mws-gen3-gbbr-emg-tan?_pos=1&_psq=ghe&_ss=e&_v=1.0

Ran mine today , I always forget how much fun they are Lol. Lots of good kills with it . The JP heavy recoil weight certainly gives it more kick.

A mate did just that , dremmeled the mag untill it fitted . My kit came with an AEG box mag adapter that clips into the mag mount so I jusy use that . Although I have the full kit I have never run the box mag , I just fit an old U/S one for the look as I prefer the stick mags and mag changes ...

D&B Militaria often have some FAL bits in. Worth having a browse now and then

Or real steel rails and carry handles for an L119 A1 build

If it's the same as the L96 was then the hop arm has a built in nub so it doesn't have the ability to use one. Degree wise , I'd probably go 70 or 75 . From memory it worked pretty well . I did eventually go over to an Airsoft Pro hop unit in the L96 , but a large part of that was down to me...

Looks similar to the Well L96 rubber too . Maple leaf used to make a replacement that worked well . Not sure if it's still available . Yep , still available...

Another vote for the grip mod !

It's the spring for the safety . Bit of a fiddle to fit properly , but here is a picture of mine in position . Nick

Put a Crazy jet inner barrel and a Maple Leaf bucking in a mate's 416 a couple of weeks ago . Seems to have transformed the accuracy from what he reports.

It's not a bad idea to fit one . You can just turn the pressure down on the regulator , but I find with mine the NPAS is a better solution.

They are great fun to use , you'll have a blast

Not familiar with the Crusader adapter , but looking at it on HPA site , yes the line in the kit should attach direct . Then set your bottle output pressue and off you go .

I've used them quite alot over the years , parts and RIFs and I've never had a single issue and always found them helpful.