• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. C

    M4 Airsoft mag brands

    I use Battle Axe mid caps in my specna and all has been fine
  2. C

    Quick Questions & Simple Answers.

    Thanks very much, I'll have a look at this.
  3. C

    Quick Questions & Simple Answers.

    Should I take my spring out my specna m4 if only playing once a month currently? To avoid it sitting for a period of time at tension. The same gun sat for years and when taking apart the cylinder head, it had an imprint on it from sitting at tension for ages. It's quick change system so no fuss.
  4. C

    The 'What have you just bought' Thread

    Thought I'd give the delta mike face snood a go, so I can get rid of the half mesh I use now as the straps rub my ears.
  5. C

    The 'What have you just bought' Thread

    Bought a M-lok sling mount and M-lok to picatinny rail adaptors from aliexpress for a fraction of the cost than getting in the UK. Got an nurpol m-lok 12inch handguard from a2supplies.co.uk, come within a few days very fast delivery.
  6. C

    Specna Arms motor upgrade?

    This is worrying to see as I have an Specna Arms Edge SA-E03 with this setup of motor, spring and use 7.4v lipo. Only ran so far on one half day session with the SHS HT motor. is there a way of telling what version I have?  Bought the gun back in July 2020
  7. C

    How does this sound after changes?

    Even with a 7.4v lipo? Was getting 17 earlier I think on the chrono. Should of checked what I was getting on standard gears to compare. Could be the motor letting me down why low rps? As its only an 16 tpa apprently which doesn't help so would need to look into a higher one which probably would...
  8. C

    How does this sound after changes?

    Thanks for that, I'll keep an eye on it. Suppose constant full auto probably won't help. Any suggestions for future you'd suggest?
  9. C

    How does this sound after changes?

    Oh thanks, always a learning curve! Yeah doubt I'll go that high haha! My site I go to is 25 max anyways and when I tested it earlier was giving me 17 on full auto. Would it be worth getting a better motor or no point? An actual high torque one
  10. C

    How does this sound after changes?

    Good to know it's not high torque, take it will be fine for the gearset still? What's PME? What would cause it? And how to avoid it? only run 7.4v at the moment have no need for more batteries thankfully 
  11. C

    How does this sound after changes?

    I've just put my specna back together after changing to 13:1 SHS gears and shimming them for the first time(hopefully good enough) and regressed new gears and compression parts. Motor is an SHS high torque. Running on fully charged 7.4 lipo After any advice to see if it sounds good enough or...
  12. C

    Took my specna apart and found no compression.

    Alright mate does this sound fine to you? I can't really tell haha! I've changed the gears to 13:1 SHS, Shimmed good enough hopefully! SHS high torque motor and 7.4 fully charged lipo   20240523_151808.mp4
  13. C

    Took my specna apart and found no compression.

    Got the compression sorted now lads, holding air with thumb over nozzle and pushing piston in. I just put all the o seals over the cylinder to stretch them a bit and all new silicone grease on them. Gearbox back together finally yet to try it out to make sure shimming was all good haha. Is it...
  14. C

    Took my specna apart and found no compression.

    Thanks mate, yeah I'll give it a try in isolation and see if I can pin point the leak or just me being an idiot! The piston head o ring was a bit slack but will see tomorrow when I test if I need to play with it. Thanks for the idea of stretching it though I'll keep in mind
  15. C

    Took my specna apart and found no compression.

    That would make sense as been left a few years in the loft haha! Should of thought about removing the spring at the time.  Least it shouldn't affect it much now I'm running it. Hopefully compression is fine once I recheck thanks
  16. C

    Took my specna apart and found no compression.

    Good to hear piston head marks are fine, I'm assuming the bucking and hop are fine as ran the gun on Sunday 0.9 joules with 0.28. What's the reason for the damaged head? If you have seen it before Plus its reasonably new 60 maple leaf bucking. It could just me not doing it right but I'll...
  17. C

    Took my specna apart and found no compression.

    Thanks! Good shout. I'll give this a go and see. Just a bit weird as was running 0.9 joules on Sunday unless it's me not doing it right
  18. C

    Took my specna apart and found no compression.

    Hello, I'm taking my specna arms edge SA-E03 apart to change the gear set and shim, while it's apart I thought to check the compression but seems to be none existent. When pressing together it just sounds like it's passing the piston or the cylinder to me. And the cylinder head has all sort of...
  19. C

    What length of outer barrel to go for?

    Thank lads! Good to know it should work, yeah hopefully easy to get the delta ring off when the time comes. I'll go with the 12inch which should put it few inches from the flash hider.
  20. C

    What length of outer barrel to go for?

    I have an Specna Arms Edge SA-E03 that removed a the front sight, so have a lot of space at the front even with the triangle sight on it. I'm possibly looking to put a longer free float m-lok outer barrel on but unsure if the ones I've found will work. I understand mine has a delta ring I'll...
Back
Top