• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. S

    Taiwangun Shipping Disruption (Brexit Related Content)

    Never hurts to simplify the workings out... My missus works out percentages the long way, I prefer to just say multiply by 1.2 for UK VAT. Or x 1.23 for Polish VAT applied, It is more of simplified method 1 sum on calculator or phone, But as said same meat different gravy & all that...
  2. S

    Taiwangun Shipping Disruption (Brexit Related Content)

    Or just multiply the TWG price by 0.831 (Same meat different gravy) £133.76 x 0.831 = £108.75 is what the price SHOULD be ex 23% VAT. What they have done is knocked off 21% (just under)... £110.59 x 1.21 = £133.89 (just under 21%) knocked off, so TWG are likely skimming 2% admin fees...
  3. S

    Taiwangun Shipping Disruption (Brexit Related Content)

    TWG & GF charge or rather CHARGED you 23% Hungary is highest @ 27% blah blah blah... it is there on the invoice if go into your GF account and look at detailed invoices so now the VAT is collected & stays in UK there may be some admin/fees on top but overall the tax revenue is...
  4. S

    have faith - 16 billion parcels & all that... [ATTACH] deliveries to 27 million homes all...

    have faith - 16 billion parcels & all that... deliveries to 27 million homes all in a day's work... straight to your door... (well front room - fuck using the front door) kudos to our posties...
  5. S

    Getting Semi Auto on a Microswitch?

    if it was a std v2/v3 then then easiest option would be something like the G&G ETU setup NB: I said easiest but still a LOT of fucking about Point being is the switch module uses a pos supply to 3 switches TRIGGER, COL & SELECTOR PLATE so it returns a positive signal from 3 switches...
  6. S

    Cyma Cm.621 Upgrades

    think most people look to tear down a gun once she dips below 300fps (as a general rule of thumb - unless you are perfectionist trying to maintain constant range/performance) nozzles will never seal 101% like say cylinder head coz they are shuttling back n forth but unlike piston they don't...
  7. S

    Cyma Cm.621 Upgrades

    WTF ??? Now don't get me wrong, fancy high end shit is all well & good if you got money falling out of your arse & all that and some Youtuber's build hose machines almost as big as their fucking ego and yes ultra high parts are manufactured to higher tolerances blah blah blah and...
  8. S

    Cyma Cm.621 Upgrades

    Ahhhh tricky one coz the tappet is a bit bespoke and the usual Red SHS is very loose/wobbly on it The plastic SHS TZ0100 is a better fit - slight wobble but way less than Red M4 https://www.shs-airsoft.com/product/shs-m4-nozzle/ Trouble is - very few places stock them and the odd slot...
  9. S

    Bad Publicity?

  10. S

    My First Real Gun.

    That's not a REAL fucking gun... (John Lennon's famous last words) hey - don't flame me it's an oldie from here... https://www.angelfire.com/or/mckennap/fuck.html it is still a peew peew toy gun but a realistic looking one but yeah research coz some are much better than others yet most if...
  11. S

    Not really in to painting stuff myself only really krylon'd some clear or two stuff black but...

    Not really in to painting stuff myself only really krylon'd some clear or two stuff black but DAAAMMMNNNN that is pretty fine job it seems to me did you use airbrush or just cans ??? I got some basic airbrush kits & compressor but was for a project at work to spray silicone &amp...
  12. S

    Yeah thought the chrome/silver 621 motor "should" be a bit better than the 516 cheapo one (tbh...

    Yeah thought the chrome/silver 621 motor "should" be a bit better than the 516 cheapo one (tbh couldn't be any cheaper/worse than the 516 motor) Only manufacturers do NOT ALWAYS fit the expected better components as the gun/model's price tag increases (usually this is true - though never...
  13. S

    Cyma Cm.621 Upgrades

    HOPEFULLY that should do ya for a good while... the RA motor should be ok in 621 - just avoid using AB but if it does cause issues then keep 621 motor in ergh the 621 and drop the RA in the 516 & both guns should be much snappier HOPEFULLY - your bad run of luck should lessen soon...
  14. S

    A thing to watch out for is using agressive Active Braking with some motors like SHS, G&G...

    A thing to watch out for is using agressive Active Braking with some motors like SHS, G&G type cans/end-bells Something to do with a mildrisk of shorting from two allen bolts into lockring under end-bell Pete @ak2m4 does metion certain motors don't like agressive AB on Titans etc... and...
  15. S

    Cyma Cm.621 Upgrades

    snip - see update/status for mega waffle... maybe get a set of 8mm bearings... just in case the SHS Spur is a bit tight/chunky then replace spur's top bushing with bearing (leave bushing under spur) that should give you a smidge more room to shim with & spin freely if the 13:1 spur...
  16. S

    I was just about to post 13:1's into the 516 needs some work... But then you are proposing to...

    I was just about to post 13:1's into the 516 needs some work... But then you are proposing to transplant the 621 std gears to the 516 - so all do-able... The issue with 516 boxes that are re-enforced at rear is that 13:1's very often (not always, but mostly) very often needs a bit of...
  17. S

    Silent Semi Decent Rps 'Nothing Crazy' List Build Kinda? Am I Missing Anything.

    Yes go with SHS gears to SHS pinion imho... Apart from presumed better meshing, You can add delayer if required, (Try adding one to a bearing - good luck), Plus think the SHS bevel is a bit more robust than, the others with 8 latches, just the bevel to spur teeth, tend to be a little less...
  18. S

    Need Help! Can't Figure Out How to Contact Advertisers?

    They're not that good... Mostly play with pussies. or some gay arseholes
  19. S

    Need Help! Can't Figure Out How to Contact Advertisers?

    The person(s) to ask would be @Jedi_Master or @proffrink if you can't contact seller directly, then perhaps see if you could leave a message or ask a question in the advert itself & then seller might be able to reply/pm you The reason why restrictions are placed on newly created accounts...
  20. S

    G&G Fire Hawk / FireHawk HC05 DSG

    Your best option is either a Perun Optical V2 MOSFET, or rip the G&G DSG out and replace with SHS DSG with 9mm bushings... or JB Weld something to create crude cams for ASTER to detect (it may not need very large pronounced cams created as the axle is larger 5mm compared to reg 3mm axle...
Back
Top