-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Search results
-
A
THE TM MWS thread
I'm afraid I didn't take it off myself, my tech did it when he installed my rail system. I can't imagine TM has some proprietary screw for this though, have you tried putting a torx in and seeing if it seats? -
A
THE TM MWS thread
Just so you know, the barrel nut on the MTR16 can apparently be INSANELY hard to remove. You'll need a lot of elbow grease to get it moving :D -
A
THE TM MWS thread
You mean your hop is being reduced if you shoot or not?! That sounds weird as hell... I haven't disassembled the wheel part of the MWS hop but usually hop chambers have an o-ring which helps maintain tension. Have you checked if that is there? -
A
THE TM MWS thread
Huh, I see! I'm not sure why I had such bad results from mine. I think I will try to pick up one of those HAO Ecoline bolts and some aftermarket nozzle set to install the valve into, and give it another try. Was there any reasoning as to why you bought the 4.5 valve? Inner barrel length? EDIT... -
A
THE TM MWS thread
There were a few issues I’ve had with my valve. Firstly, the translucent plastic adjusting screw was so tight fitting in it’s threads that the provided metal tool to adjust it did a lot of damage when adjusting, especially when performing the adjustment with it installed inside the nozzle... -
A
THE TM MWS thread
Check the listings on jkarmy’s website, they say which one to use depending on the length or your inner barrel. I got the 3.5 one which is supposed to be good for my stock inner barrel, but performance was not good to be honest, I went back to the original valve. -
A
The AAP-01 Owners Thread.
I got mine yesterday and tried it out. Performance for me with green gas was... a little lackluster? I felt like my hop was being reduced over time, sometimes I'd put a fresh mag in and start shooting and I'd have 0 hop applied for 5 bb's, then too much hop for 10 more, then flat for the rest of... -
A
THE TM MWS thread
Yeah I realise I used the wrong term here. I mean a complete upper receiver instead of upper, that you can start with to add your own inner/outer barrel + handguard setups and whatnot. I'm still wondering though, are m4 MWS uppers compatible with the MTR16? -
A
THE TM MWS thread
Damn... I mean it’s pricey but given it’s cerakoted and includes everything needed for an upper, I would be tempted to pick one up. -
A
THE TM MWS thread
Nice! Is there any news on how much it will be? I'd definitely be tempted pick one of these up depending on cost. Also, does anyone know if MWS M4 uppers work fine with MTR16 lowers, and vice versa? -
A
THE TM MWS thread
Ohhh is this a part of the quick-change barrel system they teased a few weeks ago? -
A
THE TM MWS thread
I also kind of want one of these as a spare to much about with and to try and get to as high joules as possible. What is the optimal nozzle setup to run in it? Guns modify? -
A
THE TM MWS thread
So update on the g&p 3.5 valve. I was getting pretty bad results from it. My bone stock mws/MTR16 bolt gives me 83-89m/s with a fully gassed up and fully loaded magazine with 0.25’s which is around 1j and below. The very same bolt with the g&p 3.5 valve in its setting which directs... -
A
THE TM MWS thread
I will add my part to the spreadsheet hopefully today if I get access to a chrono. Would be interesting to see how it performs in your climate with different pressure gasses -
A
THE TM MWS thread
Cheers! I’m happy with it so far. My concern was that it wouldn’t be consistent since the Angrygun mpas was all over the place but I’m left quite happy with how everything turned out. The awkward thing is that my intention of using the g&p bolt as my cqb/1 joule bolt and the stock one as my... -
A
THE TM MWS thread
I got my complete G&P bolt today 1 hour before leaving for my CQB game and so was able to test it. As @AlphaBear mentioned before, the machining is of very high quality. The screw with the C-clip also sits around 1mm away from the bolt instead of flush, so I reckon this is some kind of... -
A
THE TM MWS thread
I’m not sure there’s any other way to get a 416 loadout without one of those expensive body kits ? TM just release their MWS MK18 so I don’t imagine they’re going to suddenly come out with a 416 anytime soon but I guess you could always keep your fingers crossed? A longer inner barrel or a... -
A
THE TM MWS thread
woah woah woah hold up there, a stock TM MWS with green gas will struggle at 0°C and it's unavoidable. This kind of freezing weather is simply out of the effective operating temperature range of green gas. The chart below says that Green gas/Nuprol 2.0 at 10°C will have a pressure of 5.6 bar/81... -
A
THE TM MWS thread
Nice! Internals? Also where did you get that rail? -
A
THE TM MWS thread
Lucky for me I live in Sweden so customs charge will be around £12 flat if they declare the value of the package to be what it actually is. Shipping cost is around £20 for JKArmy "standard service" (whatever the hell that is, probably airmail). WGCshop actually sell the BCG for slightly cheaper...