• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. S

    THE TM MWS thread

    I have cured MWS bolt-bounce with an Angry gun heavy buffer and a heavier spring. It seems a problem that some rifles suffer and some do not, as I have had this problem with just one of my rifles. You may be able to cure it with one of those buffer weights fitted with small weights inside, which...
  2. S

    THE TM MWS thread

    I have found p mags slow to fill, some more than others. What I do is heat the gas cannisters first by putting them on a radiator for a short while to increase internal pressure. If the cannisters are half full this is essential as the pressure is too low to over come the fill valve, and the...
  3. S

    THE TM MWS thread

    Guns Modify do a metal hop adjuster wheel. It has 36 adjustment increments as apposed to the 24 in the standard plastic adjuster wheel. Subsequently it is much more precise, and has a metal plunger with a strong spring. I have fitted it in 2 of my MWS rifles, and it holds zero perfectly. It is...
  4. S

    THE TM MWS thread

    I am running Abbey Sniper gas in the summer which is effectively green gas without silicone (which is why I use it). In the winter and Autumn I run Mapp gas with a Madbull Propane adaptor for filling. Silicone-free Mapp gas provides the same level of power as Guarder black gas, and costs very...
  5. S

    THE TM MWS thread

    I have fitted a Prometheus 370mm 6.0mm barrel and NPAS to my MWS MK16 build. It is a DMR, normally putting out 1.8J on 0.48s, and the range and accuracy is outstanding. I also have an HAO 416 MWS, which has a 250mm 6.01 PDI barrel, and this rifle is equally impressive in terms of accuracy. I...
  6. S

    THE TM MWS thread

    I have several MWS and I run them on sniper gas in the summer(no silicone to contaminate the hop) which is slightly stronger than green. One of my rifles, a MK16 DMR runs at 2.2J (RIFT airsoft have a 2.32J limit for DMRs) and it has had no internal modifications apart from Laylax hop unit...
  7. S

    THE TM MWS thread

    I have 7 GM p mags. Two leaked from new which I fixed with some PTF tape around the fill valve on one, and with the other a good dowsing of silicone oil in the exhaust port/gas router for the other. The silicone oil eventually softened the router internals to a point where it sealed. I then let...
  8. S

    THE TM MWS thread

    Great, thanks for the update. I will give my output valves a service, based on this. 
  9. S

    THE TM MWS thread

    I bought six. One leaked from new out of the box, and another leaked after being used once. It appears they have both leaked from the fill valve. They seem to produce a bit more power than standard mags, but it is a small increase. Luckily I still have six standard mags. At some point I will get...
  10. S

    HPA, GBBR, advice on brands.

    As Lozart says the internals are the same across the MWS platform. One thing you are likely to want to change is the soft nub, in order to realistically hop anything above .28, which if you want to get the best from this RIF's potential, is not a bad idea. If you buy a MK18, you will need to...
  11. S

    HPA, GBBR, advice on brands.

    Yes if you use an NPAS like the G&P then you can have both DMR and a CQB rifle in one. Badabing does have a video on modifying your MWS selector to semi auto for DMR, which is pretty easy.
  12. S

    HPA, GBBR, advice on brands.

    I have owned a VFC 416, in fact it was my first gas gun. The externals are superb, however it proved pretty inconsistent in power terms, and unless you fit the TNT barrel and hop kit, it is inaccurate . It had an NPAS, which is fine but temperature plays such a big part in the VFC equation, that...
  13. S

    FPS/Joule Drop When Hop is Set

    Hello, A change in bucking could help. A high quality bucking will provide more hop for less hop pressure. Also barrel length is crucial in DMRs, as you need to get a good cylinder to barrel ratio, as you are using heavy bbs that take longer to leave the barrel than say .25s.   You may need to...
  14. S

    GHK Glock 17 confirmed

    I agree the hop is fine, but it is even better with a TNT TR bucking 50 degree. Mine lifts 0.32s to 50 metres, and the accuracy has improved further due to the bucking change. The trigger pull is realistic compared to the real Glocks I have fired when in the Services, so like 1st Commando said...
  15. S

    Which bucking?

    I agree with the choice of Maple leaf especially the MR bucking (old version and new). However all their buckings are good, and they work very well with the Omega nub, which is my go to nub for all buckings. However ML buckings can cause feeding problems with some guns - it is down to the longer...
  16. S

    Powerair6.Com

    My experience with them has been very good. Very fast shipping if you use the top shipping option. I recently bought a Retro Arms gearbox which with DHL shipping arrived in 2 days, and including shipping cost less than buying in the UK.
Back
Top