• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Recent content by Wild Weasel

  1. Wild Weasel

    THE TM MWS thread

    MWS Complete setup on classifieds- gas rifles _ check it out. Cheers
  2. Wild Weasel

    THE TM MWS thread

    I used to use Wurth dry chain lube but I found in the colder months it became to sticky and slowed the bolt catch down causing it to fail. I only use it in hot dry conditions now and use Parker Hale gun oil on metal to metal contacts 
  3. Wild Weasel

    THE TM MWS thread

    Check the screw holding the hop adjuster is tight as it can cause it to catch the bolt and wind the hop off?
  4. Wild Weasel

    THE TM MWS thread

    Have a look at Ollie talks Airsoft on you tube!
  5. Wild Weasel

    THE TM MWS thread

    I have one for lack of better option (John Wick fde no.) (eagle 6 has been  out for over a year now) looks a bit flimsier and had a fold up hammer reset block but is quite light and improves gas usage and accuracy believe it or not! Point to note if you are not getting a complete bolt and just...
  6. Wild Weasel

    THE TM MWS thread

    Cut mine 15mm past the valve top by making a bench hook and using the same hacksaw 'kerf' to ensure some sort of consistency over all my mags by having the syphon tubes exactly the same. The three weights are for inside the buffer and the tube is to take up the slack.
  7. Wild Weasel

    THE TM MWS thread

    https://www.opticsplanet.com/vism-barrel-nut-wrench-for-m-p-15-22-22lr.html Sorry folks I know this has been covered but can somebody confirm this is suitable to remove the barrel nut on a Mk 18 please? EDIT : just noticed that is not shipping to the United Kingdom ( asking for a mate) Any...
  8. Wild Weasel

    THE TM MWS thread

    Any word on these yet please folks? https://youtu.be/CsknN0vq_Vs
  9. Wild Weasel

    THE TM MWS thread

    This is mine and a few others findings, it's shared so feel free to upload your own data. https://docs.google.com/spreadsheets/d/1lfmKJtQm-qGtE-EJLlXXixfkon5uT6nDdt7BJOOOb1o/edit?usp=drivesdk
  10. Wild Weasel

    THE TM MWS thread

    Hi, Yeah you need to fit a spacer as the barrel nut won't hold the barrel in if you change it and you can just pull out. Further reading of faq's https://docs.google.com/document/d/10RLbvPbq-HXDayhcAIPHgoSTcFIcd3Q5PKZc288_tL0/edit?usp=drivesdk
  11. Wild Weasel

    THE TM MWS thread

    Matt Mills double and triple feed in full auto. When I pull the trigger no bb comes out like it should, one just roll out of the barrel, one is just spitted out, another one breaks in it end so on. Like the cycle was wrong. But I can't figure out how it is possible just changing the valve
  12. Wild Weasel

    THE TM MWS thread

    Thanks I'll pass this on
  13. Wild Weasel

    THE TM MWS thread

    Hey folks there's this lad on FB who is struggling with jams on his mws, I'm stumped could anybody help:- Hello folks, I got a serious jamming problem with my mws. All stock. Original valve ? Perfect. Ratech npas valve ? Jam G&p adjustable valve ? Jam  I already tried with an heavier...
  14. Wild Weasel

    THE TM MWS thread

    That's the one, works like a charm on mine.
  15. Wild Weasel

    THE TM MWS thread

    Don't agree with unScrewing the buffer tube if you don't have to, that can lead to over-travel on the bolt and that in turn can crack the lower in half if you don't pack out the base of the tube with the hsb buffer from six G gunsmithing or 10p coins. A better solution in my opinion for what...
See more
Back
Top