Search results

MWS Complete setup on classifieds- gas rifles _ check it out. Cheers

I used to use Wurth dry chain lube but I found in the colder months it became to sticky and slowed the bolt catch down causing it to fail. I only use it in hot dry conditions now and use Parker Hale gun oil on metal to metal contacts 

Check the screw holding the hop adjuster is tight as it can cause it to catch the bolt and wind the hop off?

Have a look at Ollie talks Airsoft on you tube!

I have one for lack of better option (John Wick fde no.) (eagle 6 has been  out for over a year now) looks a bit flimsier and had a fold up hammer reset block but is quite light and improves gas usage and accuracy believe it or not! Point to note if you are not getting a complete bolt and just...

Cut mine 15mm past the valve top by making a bench hook and using the same hacksaw 'kerf' to ensure some sort of consistency over all my mags by having the syphon tubes exactly the same. The three weights are for inside the buffer and the tube is to take up the slack.

https://www.opticsplanet.com/vism-barrel-nut-wrench-for-m-p-15-22-22lr.html Sorry folks I know this has been covered but can somebody confirm this is suitable to remove the barrel nut on a Mk 18 please? EDIT : just noticed that is not shipping to the United Kingdom ( asking for a mate) Any...

Any word on these yet please folks? https://youtu.be/CsknN0vq_Vs

This is mine and a few others findings, it's shared so feel free to upload your own data. https://docs.google.com/spreadsheets/d/1lfmKJtQm-qGtE-EJLlXXixfkon5uT6nDdt7BJOOOb1o/edit?usp=drivesdk

Hi, Yeah you need to fit a spacer as the barrel nut won't hold the barrel in if you change it and you can just pull out. Further reading of faq's https://docs.google.com/document/d/10RLbvPbq-HXDayhcAIPHgoSTcFIcd3Q5PKZc288_tL0/edit?usp=drivesdk

Matt Mills double and triple feed in full auto. When I pull the trigger no bb comes out like it should, one just roll out of the barrel, one is just spitted out, another one breaks in it end so on. Like the cycle was wrong. But I can't figure out how it is possible just changing the valve

Thanks I'll pass this on

Hey folks there's this lad on FB who is struggling with jams on his mws, I'm stumped could anybody help:- Hello folks, I got a serious jamming problem with my mws. All stock. Original valve ? Perfect. Ratech npas valve ? Jam G&p adjustable valve ? Jam  I already tried with an heavier...

That's the one, works like a charm on mine.

Don't agree with unScrewing the buffer tube if you don't have to, that can lead to over-travel on the bolt and that in turn can crack the lower in half if you don't pack out the base of the tube with the hsb buffer from six G gunsmithing or 10p coins. A better solution in my opinion for what...

Don't think I want to go any heavier on sub 350fps as my rounds will arrive after a warning letter submitted in writing they would be that slow! It's a field with a strip of woodland along the side that I borrow from a friend approximately 160m X 100m although she will be turning it into a...

Still on the plastic buffer after two years with no problems. With regards to upgrades if I could go back and tell my younger self I'd upgrade the hop nub (six g) the lightweight bolt catch and green gas mod the mags and save the money for externals as I've tried most 'upgrades' and found for me...

Nothing, I totally mis read your post. What I was getting at was lengthening the valve spring in the nozzle should cause the valve to close slower (in theory) and increase FPS and conversely shortening it should close faster and decrease FPS.

Sorry mate, your right it won't help with consistency it will just increase the FPS.  I should have read your post more carefully.

Just as a suggestion you could try if you have a spare to shorten the spring in front of the npas to reduce the gas required before the valve closes and the excess is used to cycle the action?