• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Recent content by Exibit

  1. E

    M100/M90 springs

    I did see it was an old topic but was not sure if this was still an outstanding issue
  2. E

    M100/M90 springs

    Its a hard question to answer lots depends also ont he compression in the hear box itself, I have a KWA SR10 I ahve been changing springs for ages looking for the best FPS get me near 350FPS Its been driving me insane the best spring I have used so far is the Systema M100 (though the last time...
  3. E

    Battery Advice - KWA SR10 Crane Stock

    Devastator does that only apply to Lio packs what I was to get a 9.6V 2400MAH MiMH battery
  4. E

    Battery Advice - KWA SR10 Crane Stock

    Hi Guys I'm slightly confused on the dicharge rate settings on battery packs available for my SR10 I have ordered a battery a 74.v 3000mah 15c Lipo though I had asked a question on the KWA Forums and had the below as a response So that means I cant use any Lipo battery with a high MAH as...
  5. E

    KWA SR10 - Spring Change

    I thought I was doing so well got to the final part Getting the gear box out then came across the smallest hex nut I have ever seen in the mag release So had to put it all together again - I might have one more try tomorrow when I buy more allen keys
  6. E

    KWA SR10 - Spring Change

    Matt Thanks for the reply I have had it in bits today but the last hex screw I needed to remove was a problem as I did not have an allen key to fit it, its the hx nut that is in the mag release very small - anyway gun is back together though did not manage to change the spring - What shop would...
  7. E

    KWA SR10 - Spring Change

    Hi guys I have KWA SR10 and its to hot for Uk sites as it shoots at 400FPS - I have bought a Systema M100 Spring so I can lower the FPS to around 350 or maybe slightly less How difficult a job is this for a neewb am I better taking it to a shop and getting them to do it and if so which shop so...
  8. E

    GT Power/iCharger -- 6S or 8C - Advice Required

    Devastator thanks for the posts mate I really need a charger that can run from a 12 Volt source so if I'm at an airsoft meet over the weekend I can still have the ability to charge my Lipo's in the field Just need to decide which one of teh above chargers to buy
  9. E

    GT Power/iCharger -- 6S or 8C - Advice Required

    You will never use 6s or 8s in airsoft, that's 22.2v and 29.6v respectively. I thought that 6S or 8S was the number of lipo battery in a pack ie 6 or 8 batterys
  10. E

    GT Power/iCharger -- 6S or 8C - Advice Required

    Thanks for the reply, That does help I will forget the GT chrager then Ok so now I just need advice on which of these two chargers to purchase http://www.landwarriorairsoft.com/acatalog/Chargers.html or I really do like the icharger...
  11. E

    GT Power/iCharger -- 6S or 8C - Advice Required

    Hi guys New to airsoft and trying to spec out the equipment I will need, currently joined a club and will have my ukara shorlty Will be buying either a KWA M4 or G & P M4 not sure yet I'm looking to purchase a charger for lipo battery packs, must be reliable I am currently looking at 2...
See more
Back
Top